Antec ISK 300 Mini-ITX case

Enclosures and acoustic damping to help quiet them.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar

chero
Posts: 33
Joined: Mon Aug 16, 2004 7:32 am
Location: Canada

Antec ISK 300 Mini-ITX case

Post by chero » Sat Nov 15, 2008 10:26 am

Came across this today:

http://tv.hexus.net/show/2008/11/HEXUS_ ... ec_ISK_300

It's nice to learn that Antec will be providing some Mini-ITX enclosures. Very difficult to see what it looks like though.

chero
Posts: 33
Joined: Mon Aug 16, 2004 7:32 am
Location: Canada

Post by chero » Sat Nov 15, 2008 10:48 am

I imagine it's easier said than done, but wouldn't it be cool if they could scale an NSK3480 down to the mini-itx form factor, just like they did for the Mini Skeleton? Maybe it'd have an 80mm case fan, which you'd then use a Ninja Mini with. :)

Moogles
Posts: 315
Joined: Thu Mar 22, 2007 10:28 am

Post by Moogles » Sun Nov 16, 2008 6:56 pm

Two 60mm fans. Worthless.

I can't imagine a person willing to pay a premium for mini ITX only to have it be obnoxiously loud. The form factor lends itself so well to using a single 120mm fan either at the top (if the motherboard is placed horizontally) or on the side (if the mobo is placed vertically). It seems like a such simple design yet noone gets it right.

Build a 200mm by 200mm cube. Single 120mm fan at the top or side and you're DONE. Similar to the Nexus Psile, but with a larger fan.

Vicotnik
*Lifetime Patron*
Posts: 1831
Joined: Thu Feb 13, 2003 6:53 am
Location: Sweden

Post by Vicotnik » Sun Nov 16, 2008 7:15 pm

A single quiet 120mm fan can keep a normal (i.e. E8400, 4670) system cool.

60mm is worthless I agree, but 120mm seems a bit overkill for a mini ITX system. It's not bad as such, but a single quiet 80mm fan should be able to do the job as well.

BillyBuerger
Patron of SPCR
Posts: 857
Joined: Fri Dec 27, 2002 1:49 pm
Location: Somerset, WI - USA
Contact:

Post by BillyBuerger » Sun Nov 16, 2008 10:06 pm

I would disagree that 60mm fans are worthless. Any fan, even small ones can be quiet if they spin slow enough. And given that mini-ITX boards are generally built around low-powered parts, the case shouldn't need the amount of airflow that a 120mm fan would give you. And making a case that would fit a 120mm fan would require it not to be so mini anymore defeating one of the reasons for the form factor.

I guess we'll just have to wait and see how it works out. Hopefully the fans they pick for it are decent.

Moogles
Posts: 315
Joined: Thu Mar 22, 2007 10:28 am

Post by Moogles » Mon Nov 17, 2008 9:55 am

A 60mm fan that's spinning at anything other than jet turbine RPMs, does not move any air. A mini ITX motherboard is 170mm by 170mm. That leaves plenty of space for a low profile cooler and a 120mm chassis fan above it, if you're opposed to the cube shape.

There are some very nice mini ITX motherboards available, as capable as any micro ATX board. 780G, G45, boards that support Core 2 Duo CPUs and PCI-E x16, etc. These chipsets require good airflow, something two low RPM 60mm fans won't be able to provide. Mini ITX's dimensions are still greater than those of a 120mm fan. It's just silly not to use one. You're comprising cooling and noise at the cost of, at best, a slight increase in case volume by going with 60mm fans.

Aris
Posts: 2299
Joined: Mon Dec 15, 2003 10:29 am
Location: Bellevue, Nebraska
Contact:

Post by Aris » Thu Nov 20, 2008 2:29 am

60mm fans w/ half hight only expansion? feels like were moving back in time now. didnt they already learn these lessons? There are already much better mini itx cases available than this.

Kreed
Posts: 91
Joined: Tue May 15, 2007 3:48 am
Location: Australia

Post by Kreed » Mon Jan 12, 2009 4:26 pm

More pictures of the case can be found here:

http://journal.mycom.co.jp/articles/200 ... index.html
http://www.intomod.com/ReadNews.asp?NewsID=10986
http://www.coolenjoy.net/bbs/zboard_new ... page=1&kw=

Is that a fanless PSU i can see?

There's even mention of an ISK 400.

hans007
Posts: 80
Joined: Sun Oct 09, 2005 3:37 am

Post by hans007 » Mon Jan 19, 2009 1:49 pm

the chinese sites seem to indicate those are dual 80mm fans, not 60mm.


i cant read chinese but you see the word 80mm on some of those chinese sites.

Shaman
Friend of SPCR
Posts: 278
Joined: Sun Jan 28, 2007 8:34 pm
Location: Portugal

Post by Shaman » Mon Jan 19, 2009 2:02 pm

hans007 wrote:the chinese sites seem to indicate those are dual 80mm fans, not 60mm.


i cant read chinese but you see the word 80mm on some of those chinese sites.
That's also the impression I first got looking at the pictures. In one of those pics it's obvious the two fans have about the same length as the motherboard area, and an mITX mobo is ~170mm in length. 80mm + 80mm = 160mm ......

aztec
Posts: 443
Joined: Mon Dec 12, 2005 5:01 am
Location: Foster City, CA

Post by aztec » Mon Mar 09, 2009 6:43 pm

anyting else come out of the ISK300?

The pic from Akiba looks like 2x 80mm fans. If so...this will be my next ITX case.

Image

atha
Posts: 12
Joined: Fri Nov 04, 2005 12:21 am
Location: Finland

Post by atha » Tue Mar 10, 2009 1:02 am

Same page says that the included PSU is 65 watt. I would have hoped a bit more.

bgiddins
Posts: 175
Joined: Sun Sep 14, 2008 1:04 am
Location: Australia

Post by bgiddins » Tue Mar 10, 2009 3:05 am

Can anyone tell from those pictures what the disk capacity is?

I was looking at a Mini-box ITX case, but it only came with 40mm fans - you could do a lot with a 120mm or 140mm fan mounted directly above a motherboard in one of these cases if a designer applied themselves. A 140mm fan at 500 or 800rpm might be enough to work with the correct form factor passive heatsink for C2D/C2Q/i7.

My interest is for an Atom build anyway.

Apparently the ISK 300 has a single 80mm fan, the ISK 400 has the dual fans. They have 3 and 4 drive bays respectively, but no mention of what size - that could be a 5.25" bay in the front.

Kreed
Posts: 91
Joined: Tue May 15, 2007 3:48 am
Location: Australia

Post by Kreed » Thu Mar 19, 2009 2:21 am

Another pic of the ISK 300:


Image

It looks like it has two vents on the side, which suggests dual fans.

Tephras
Posts: 1140
Joined: Tue Sep 07, 2004 11:03 am
Location: Europe

Post by Tephras » Wed May 27, 2009 2:24 pm


Paul Colby
Posts: 6
Joined: Fri Apr 10, 2009 2:47 am
Location: Australia
Contact:

19 volts...

Post by Paul Colby » Wed May 27, 2009 3:08 pm

I just noticed in the user manual (http://www.antec.com/pdf/manuals/ISK%20 ... ual_EN.pdf) that the external power brick runs at 19V... this is both a good thing and a bad thing, depending on how you look at it (eg you might have a more powerful 12V adapter already laying around), but personally I prefer 19V :)

It amazes me that people can use things like 120W PicoPSU supplies (I do to) with those pathetic old DC connectors - that's 10 amps at 12V!! Most of those old round DC connectors would get seriously hot at 10 amps (and drop a lot of voltage while they're at it). But at 19 volts, that would fall to ~ 6.4 amps, which is still a lot, but much better than 10 ;)

Of course, the ISK 300-65 only runs a 65W power supply, and at 19V, that's only ~3.4 amps, which is quite reasonable (would be 5.4 amps at 12V).

anyway, that's my (one and only?) thought for the day ;)

can't wait to get one of these cases... my local (Australian) supplier told me "the Antec ISK 300-65 ITX case is expected to be available in Australia sometime around the 4th week of June."

paul.

Paul Colby
Posts: 6
Joined: Fri Apr 10, 2009 2:47 am
Location: Australia
Contact:

A fuse holder?

Post by Paul Colby » Wed May 27, 2009 3:16 pm

BTW, can anyone guess what the black rectangular connector (?) on the back of the case is for? I'm talking about the one at the top, middle. Between the DC power socket, and the '+' panel. It kind of looks like it has two square sockets in it - each about the size of an optical S/PDIF socket (though I doubt that's what it is).
Image
There's no mention of it that I can see in the manual... just curious ;)

My best guess, so far, is: a fuse holder? or maybe part of the internal power supply?

any other ideas?

paul.

bonestonne
Posts: 1839
Joined: Mon Feb 05, 2007 2:10 pm
Location: Northern New Jersey
Contact:

Post by bonestonne » Wed May 27, 2009 3:27 pm

you'll find the same type of thing on the P182/3 i'm pretty sure.

It's the speed switch for the Antec Tri-Speed fans in the case.

Paul Colby
Posts: 6
Joined: Fri Apr 10, 2009 2:47 am
Location: Australia
Contact:

Post by Paul Colby » Wed May 27, 2009 3:34 pm

bonestonne wrote:you'll find the same type of thing on the P182/3 i'm pretty sure. It's the speed switch for the Antec Tri-Speed fans in the case.
Ah, I see... just like this one (on the P182):

Image

Thanks bonestonne! :)

paul.

Ender17
Posts: 78
Joined: Tue Feb 01, 2005 9:59 am

Post by Ender17 » Sat May 30, 2009 10:55 pm

how does the PSU work? could you use a board like this?
http://www.newegg.com/Product/Product.a ... 6813500021

Botanic
Posts: 22
Joined: Fri Dec 26, 2008 9:07 am
Location: Sweden

Post by Botanic » Tue Jun 09, 2009 1:22 pm

It looks like this case can be bought in Sweden now. At least some sites has it for order.

Anyone with a review of it? How good is the PSU?

slashgyoza
Posts: 7
Joined: Mon Jun 08, 2009 10:58 am
Location: USA

Post by slashgyoza » Tue Jun 09, 2009 5:17 pm

The case is available in the US now. I just got the case today.

The ISK 300-65 has space for two 80mm fans, but only 1 is included. The second 80mm fan space is filled with a plastic cover, which is easily removable.

The PSU is 65 Watts, and comes with a 24pin (20+4) and 4-pin CPU power connector, so theoretically it could power a standard Intel or AMD Mini-ITX board, though 65W may not be enough for anything but the most power efficient CPUs.

I'll be testing this with an E7400 and Zotac NF630I-D-E motherboard later today.

hans007
Posts: 80
Joined: Sun Oct 09, 2005 3:37 am

Post by hans007 » Tue Jun 09, 2009 6:08 pm

the case seems pretty big for what it is. especially given the 65 watt power supply.

Its dimensions are not very competitive with some other cases anyway given it still uses a laptop optical drive .

I have an inwin BM series, and it seems like it fits more in less space (except the inwin doesnt have a solid state psu).

This might be one of antec's duds. their "small" cases seem to not be so great. I.e. the mini p180 for example is almost the same size as other brand full ATX cases.

Botanic
Posts: 22
Joined: Fri Dec 26, 2008 9:07 am
Location: Sweden

Post by Botanic » Tue Jun 09, 2009 10:55 pm

To me the size of the case is not so important. The bigger the case, the cooler it will be (less noise). At least it is not as big as a normal ATX case.

I haven't found any information about the efficency of the PSU.

My original plan was to get a PicoPSU, but with this case I would save some money if the PSU is doing it's job as good.

So please, review the PSU.

slashgyoza
Posts: 7
Joined: Mon Jun 08, 2009 10:58 am
Location: USA

Post by slashgyoza » Tue Jun 09, 2009 11:50 pm

I got the machine built - here are the specs so far:

Intel E7400
Zotac NF630I-D-E Motherboard
2GB Kingston Low-Profile RAM (1 DIMM) running at 667Mhz
320GB Seagate Momentus 7200.3 ST9320421AS
No Optical Drive
USB Keyboard & Mouse
2 x Scythe Kama-Flex 80mm fans (1500RPM model), running at full speed
Stock Intel CPU Cooler (copper core) from a Q8200 for now, as the Scythe Shuriken does not seem to fit w/o mods to the drive mounting brackets

In BIOS, this PC idled around 46 Watts (measured by a Kill-a-Watt). The machine idles around 30 Watts in Windows. So the PSU seems very efficient.

I ran Orthos for 10 minutes, and the peak load was ~62 Watts (consistently for most of the 10 minute period), with some brief spikes to 65-66 Watts towards the end of each test run. CPU temps (according to Real Temp) idle around 30-31C, and increased to 46C during Orthos.

I ran another Orthos for 20 minutes, and the peak load after ~18 minutes was 68 Watts :shock: and temps increased to 51C.

So this machine/PSU should be OK for normal everyday use, but I am not sure if I want to run Orthos on this machine for too long.

I'm considering swapping the CPU with an E7200 I have on another machine, to reduce the peak power usage. I'll probably give that a try once I have a better CPU heatsink to install.

The machine is not that quiet right now, due to the stock Intel fan. Cooling seems quite good for a case this size. Once I have a better CPU heatsink & some fan controllers on the case fans, I'll have a better idea of how quiet it can get. The case itself is very sturdy and well-built.

Ralf Hutter
SPCR Reviewer
Posts: 8636
Joined: Sat Nov 23, 2002 6:33 am
Location: Sunny SoCal

Post by Ralf Hutter » Wed Jun 10, 2009 1:22 pm

slashgyoza wrote:The case is available in the US now. I just got the case today.
From where?

deruberhanyok
Posts: 64
Joined: Tue Sep 30, 2008 2:06 pm
Location: MD

Post by deruberhanyok » Wed Jun 10, 2009 7:05 pm

You can get it from Antec directly actually:

http://www.antec.com/Detail.bok?no=678

slashgyoza
Posts: 7
Joined: Mon Jun 08, 2009 10:58 am
Location: USA

Post by slashgyoza » Thu Jun 11, 2009 11:50 am

I got my case from Provantage.

Botanic
Posts: 22
Joined: Fri Dec 26, 2008 9:07 am
Location: Sweden

Post by Botanic » Sun Jun 14, 2009 11:35 am

Are you still happy with the case?
I will probably order the case any day soon.

Trav1s
Posts: 259
Joined: Sun Nov 09, 2008 12:33 pm
Location: CR, IA

Post by Trav1s » Sun Jun 14, 2009 12:20 pm

I found it stateside for $60 + shipping.

https://www.ewiz.com/detail.php?name=CA-ISK300

Post Reply