How do I get the Sonata open?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar
Cavicchi wrote:All in all, I am not impressed, especially with those Antec holes drilled into the side. A quiet case with holes in both sides.
Ya know, I don't mean to be insensitive, but since you seem so unhappy with your purchase.....in light of the abundance of available information on this case (ie):Cavicchi wrote:Speaking of the front panel, what a crummy front door.
SPCR review.
Search on Sonata
I can offer only two words--caveat emptor.
-
- Posts: 556
- Joined: Tue Oct 28, 2003 5:14 am
- Location: London, UK
The box of screws are normally behind the 3.5inch drive cage. Removing one of the drive rails - just by sliding it - should let you get at the screws. You don't have to remove the front panel.
As for parts of the case breaking etc, are you sure you're not being heavy handed with it, or using force when you should instead be pressing at levers etc?
As for parts of the case breaking etc, are you sure you're not being heavy handed with it, or using force when you should instead be pressing at levers etc?
-
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
The Sonata is probably the most-reviewed case over the last year and every review I can remember reading talked about those "Antec" holes so their existance should come as no suprise. Many of the reviews have also gone into a fair amount of detail about the reason those holes exist. You'd almost have to ignore any of the writing about the Sonata to be suprised about those holes.
That being said, I rarely miss an opportunity to criticize the Sonata for it's restrictive bezel/ventilation and those holes in the side, as well as the non-removable right side door and recommend that people go with the cheaper and more effective SLK3700AMB/6A19 instead.
That being said, I rarely miss an opportunity to criticize the Sonata for it's restrictive bezel/ventilation and those holes in the side, as well as the non-removable right side door and recommend that people go with the cheaper and more effective SLK3700AMB/6A19 instead.
-
- Posts: 153
- Joined: Mon Oct 27, 2003 5:35 pm
- Location: Arlington, Virginia
- Contact:
That USB front panel cover has really been a show stopper for me when looking at the Sonata in the store. It is made of chromed plastic and is very flimsy and the one I tried it works very stiff. I think it would be easy to break and not easy to use if it doesn't. I am very disappointed by the lack of quality in this part, which is likely to be opened and closed a lot. It looks tacky on a case with such a refined finish.
-
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
To add insult to injury, that cheesy looking chrome cover loses it's chrome plating after a while too. First it starts oxidizing then it starts chipping off, depending on what type of use it gets.canthearyou wrote:That USB front panel cover has really been a show stopper for me when looking at the Sonata in the store. It is made of chromed plastic and is very flimsy and the one I tried it works very stiff. I think it would be easy to break and not easy to use if it doesn't. I am very disappointed by the lack of quality in this part, which is likely to be opened and closed a lot. It looks tacky on a case with such a refined finish.
I'd strip it off and paint it with vinyl dye if I owned a Sonata.
Hey Cavicchi,
A couple of days ago you were dumping on people who critiqued the Sonata for some of it's flaws. That was before you had even seen one or had any knowledge of the Sonata. Now you are dumping on the Sonata and how it was reviewed.
The review on SPCR was accurate and insightful.
The Sonata can be made to run pretty much completely silent. There are several reports of Sonata success, pictures, and ideas. Read the forums, make your case quiet, and move on.
By the way, the hardware box comes out if you remove the drive trays.
-- Tom
(happy Sonata owner)
A couple of days ago you were dumping on people who critiqued the Sonata for some of it's flaws. That was before you had even seen one or had any knowledge of the Sonata. Now you are dumping on the Sonata and how it was reviewed.
The review on SPCR was accurate and insightful.
The Sonata can be made to run pretty much completely silent. There are several reports of Sonata success, pictures, and ideas. Read the forums, make your case quiet, and move on.
By the way, the hardware box comes out if you remove the drive trays.
-- Tom
(happy Sonata owner)
I disconnected the blue lights, too bright and not really a necessity for me. For that matter, I killed off all the front panel connectors, didn't really have a need for them. So far I am nothing but thrilled with my Sonata, no case is perfect, but the Sonata is a nice balance of features and looks, and it can be silenced.
-
- Posts: 153
- Joined: Mon Oct 27, 2003 5:35 pm
- Location: Arlington, Virginia
- Contact:
Yes, that is a problem with the silver and chrome plastic finishes popular today. I like the look but the matte silver will eventually wear off as it is on my digital camera. The chrome plastic is vulnerable to oils and contaminints on the fingers (if you have ever made plastic models you will know what I am talking about). I thought it was metal.
I like the Lian Li with a nice metal door for the USB ports.
The Sonta has a wonderful finish. Of course it's not like a varnished piano, but the look is close, probably better described as a good auto finish. The case design is harmonious also, although I do not prefer the Antec holes. I had not thought of the front panel LEDs being too bright. My new LCD monitor power supply has an LED that is so bright it was like a searchlight across the room trying to sleep. I had to turn it against the wall. The Sonta is a great idea and groundbreaking product that was a long time coming from case manufacturers.
I think I would like the 90* drive bay.
On the other hand, I would like an aluminum case because of the lightweight and would be willing to give up a little silence to have that. Also, I like a small case.
Steve
I like the Lian Li with a nice metal door for the USB ports.
The Sonta has a wonderful finish. Of course it's not like a varnished piano, but the look is close, probably better described as a good auto finish. The case design is harmonious also, although I do not prefer the Antec holes. I had not thought of the front panel LEDs being too bright. My new LCD monitor power supply has an LED that is so bright it was like a searchlight across the room trying to sleep. I had to turn it against the wall. The Sonta is a great idea and groundbreaking product that was a long time coming from case manufacturers.
I think I would like the 90* drive bay.
On the other hand, I would like an aluminum case because of the lightweight and would be willing to give up a little silence to have that. Also, I like a small case.
Steve