i recently i got into shooting and editing video and need to build a silent video editing desktop.
i decided to build a budget system based on a AMD 1090t
computer will be on the ground about 5-6 feet away from my head
the only components that i do have that i would like to utilize (left over form a canceled build few years back) are:
2 x Nexus 120mm
1 x Scythe Ninja rev B
--
1. as far as the case goes, im leaning to the antec sonata 4 (with included 620w ps). I will not be using the included fan.
I was thinking of getting the fractal designs R3 but there is only one place that sells fractal stuff in toronto and currently their stock is one micro atx R2 which is not what i want. I also looked at the new nzxt h2 but i dont like it. antec p193 is too expensive.
2. if i dont go for the antec sonata 4 (with included 620watt PS) i will most likely go with a antec tp650
3. need advice on a mobo. I would like usb3 and sata3 (6gb/s) since i plan on using a SSD as a system drive. I would also like the mobo to be able to do raid0 (2 x 1tb hitachi) for encoding, alongside raid1 (2 x 2tb or higher drives for backup storage)
ive never done raid before, is the above possible? (to have both raid 0 and 1 natively on the mobo)
also the board needs to support the Ninja rev B (im assuming the ninja will fit am3 boards since it supports am2 and i read that both sockets have same mounting system)
EDIT: i think i will go with this mobo:
http://www.newegg.ca/Product/Product.as ... -_-Product
4. the video card will be fanless (unless there is one with a fan that is very quiet and will not be the loudest component in the system please suggest)
i may put the fan that comes with the ninja on the fanless card, bringing the total number of fans used in the system to 4 (2 nexus', the scythe ninja fan and the fan on the PS)
please advise which of the above is the recommended setup, as well as a recommended video card. i do not game much on the pc and if i do it will be a old game (original ghost recon maybe) so video card only needs to support editing native AVCHD 1080p footage (using sony vegas 10)
there video cards im considering are:
http://www.newegg.ca/Product/Product.as ... 6814102902
http://www.newegg.ca/Product/Product.as ... 6814161343
http://www.newegg.ca/Product/Product.as ... 6814500175
--
my main questions are:
-will the above system will be quiet?
-will the ninja rev b fit onto that asus mobo?
-should i reconsider any components?
any advice is appreciated.
thanx
budget NLE (video editing) build
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
Re: budget NLE (video editing) build
i managed to buy a fractal design R3.
i will not be using included fans that come with the case.
fans will be 2 nexus 120mm and the scythe one that comes with the ninja
i mainly need advice on what graphic card to buy... should i buy fanless and put the scythe fan on it?
or is there a graphic card with a fan that will not be the loudest component compared to the above?
as i already mentioned, i mainly need to edit video and gaming is not in the equation
i will not be using included fans that come with the case.
fans will be 2 nexus 120mm and the scythe one that comes with the ninja
i mainly need advice on what graphic card to buy... should i buy fanless and put the scythe fan on it?
or is there a graphic card with a fan that will not be the loudest component compared to the above?
as i already mentioned, i mainly need to edit video and gaming is not in the equation
Re: budget NLE (video editing) build
600w psu seems like massive overkill.
as for the video card, iirc Vegas uses cuda, not opengl, so you'll be wanting a nvidia graphics card if youre looking into gpu acceleration.
if youre willing to stretch into the gts450, the msi cyclone is said to be a very quiet cooler; as are the gigabyte windforce models, and the sparkle calibre series. otherwise that fanless zotac card you posted before would seem to be your best choice. yuo might want to see what your temps are like before deciding on a supplementary fan.
as for the video card, iirc Vegas uses cuda, not opengl, so you'll be wanting a nvidia graphics card if youre looking into gpu acceleration.
if youre willing to stretch into the gts450, the msi cyclone is said to be a very quiet cooler; as are the gigabyte windforce models, and the sparkle calibre series. otherwise that fanless zotac card you posted before would seem to be your best choice. yuo might want to see what your temps are like before deciding on a supplementary fan.
Re: budget NLE (video editing) build
i know.fumino wrote:600w psu seems like massive overkill.
this is for future upgrades as well as the idea that as long as im in the low requirements of the PS, it will hardly ever spin up
from the reviews i read, there is not a significant gain in having a cuda capable card. mixed reviews at bestfumino wrote: as for the video card, iirc Vegas uses cuda, not opengl, so you'll be wanting a nvidia graphics card if youre looking into gpu acceleration.
id be up checking out that option... but are they quiet enough to not overpower (spl wise) the rest of the components?fumino wrote: if youre willing to stretch into the gts450, the msi cyclone is said to be a very quiet cooler; as are the gigabyte windforce models, and the sparkle calibre series. otherwise that fanless zotac card you posted before would seem to be your best choice. yuo might want to see what your temps are like before deciding on a supplementary fan.
Re: budget NLE (video editing) build
during 2d use, they should be very quiet.
in your first post you said:
you say budget, but with the 1090T, and the price of a motherboard, you could look at a sandybridge system. even non overclocked on an h67 platform it should be very capable.
in your first post you said:
vegas uses cuda. if youre not going to use gpu acceleration, then you dont need to worry about cuda, and could go with a ati 5450, or even an old nvidia 8400. or anything really...even integrated graphics.video card only needs to support editing native AVCHD 1080p footage (using sony vegas 10)
you say budget, but with the 1090T, and the price of a motherboard, you could look at a sandybridge system. even non overclocked on an h67 platform it should be very capable.
Re: budget NLE (video editing) build
Here's the Anandbench comparision of the 1090T vs the i5-2500K. The 2500K beats the 1090T in all video benchmarks and consumes a lot less power => less heat => lower fan rpm => less noise.fumino wrote: you say budget, but with the 1090T, and the price of a motherboard, you could look at a sandybridge system. even non overclocked on an h67 platform it should be very capable.
Price-wise, the Intel CPU costs $220 vs $200 for the 1090T at newegg.ca. A decent H67 mobo costs ~$100 (same as referred mobo in the OP), or a P67 will run ~$120. You get Quicksync with the H67.
I'd lean toward the 2500K/H67 for the extra $20 and don't bother with the discrete video card.
I can't speak to whether the Ninja Rev B can be adapted to socket 1155.