PSUs: The source of DC power for all components in the PC & often a big noise source.
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar
-
serpent
- Posts: 14
- Joined: Thu Apr 03, 2008 8:04 am
- Location: denmark
Post
by serpent » Thu Apr 03, 2008 8:08 am
Hi
My Antec Phantom 500 just died
I was wondering if the modu82+ has long enough cables for use in the antec p180 case?
Thank you for helping.
-
AuraAllan
- *Lifetime Patron*
- Posts: 713
- Joined: Wed Mar 07, 2007 7:49 am
- Location: Denmark
Post
by AuraAllan » Thu Apr 03, 2008 8:12 am
Welcome to SPCR !
I cant answer your question. Sorry.
Could you please tell me where your going to get the Modu82+ from?
I want one too but its not available in DK.
Edit: Cable legths are mentioned here
-
NeilBlanchard
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
-
Contact:
Post
by NeilBlanchard » Thu Apr 03, 2008 8:24 am
Hello,
The review of the Mini P180 used the Enermax -- it is just about 3" shorter than the P18x -- it certainly looks like there would be
plenty of length!
-
serpent
- Posts: 14
- Joined: Thu Apr 03, 2008 8:04 am
- Location: denmark
Post
by serpent » Thu Apr 03, 2008 8:50 am
AuraAllan wrote:Welcome to SPCR !
I cant answer your question. Sorry.
Could you please tell me where your going to get the Modu82+ from?
I want one too but its not available in DK.
Edit: Cable legths are mentioned here
HI
I am going to use
www.preis.de
-
AuraAllan
- *Lifetime Patron*
- Posts: 713
- Joined: Wed Mar 07, 2007 7:49 am
- Location: Denmark
Post
by AuraAllan » Thu Apr 03, 2008 9:14 am
Thanks
-
yefi
- Posts: 134
- Joined: Tue Jun 12, 2007 3:19 pm
- Location: UK
Post
by yefi » Thu Apr 03, 2008 9:26 am
I have the Enermax Modu82 425W in the P180 and the cable reaches everywhere I could think of except if you are in the sorry position of having a mobo with a power connector right at the very top of the board like me. I use an extender. I did turn the Enermax upside down which allowed it to reach, but it started making buzzing noises.
Incidentally, the 425W is a great power supply. Cut my AC power from 86W down to 78W, and the last PSU was a Seasonic S-12 330 80+ which is extremely efficient itself.
-
tutu
- Posts: 119
- Joined: Wed Jan 30, 2008 8:26 pm
- Location: UK
Post
by tutu » Thu Apr 03, 2008 3:11 pm
Fits my P182 (almost the same) just fine:
-
serpent
- Posts: 14
- Joined: Thu Apr 03, 2008 8:04 am
- Location: denmark
Post
by serpent » Fri Apr 04, 2008 3:21 pm
Thank you for the nice picture tutu
I just ordered the modu
-
foufou55
- Posts: 5
- Joined: Sun Mar 23, 2008 4:11 am
- Location: Fr
Post
by foufou55 » Mon Apr 07, 2008 10:20 am
hello
i have P182 too and a p5e3
your 12v on the motherboard is in top rear ? near fan ?
thanks
-
tutu
- Posts: 119
- Joined: Wed Jan 30, 2008 8:26 pm
- Location: UK
Post
by tutu » Mon Apr 07, 2008 10:44 am
foufou55 wrote:hello
i have P182 too and a p5e3
your 12v on the motherboard is in top rear ? near fan ?
thanks
I assume this question is for me!! My 12v is top rear (near fan). It's a 6-pin (PSU comes with 4-pin as well).
-
foufou55
- Posts: 5
- Joined: Sun Mar 23, 2008 4:11 am
- Location: Fr
Post
by foufou55 » Mon Apr 07, 2008 11:14 am
thanks like my p5e3 ! So it's good for my p182. My old corsair hx520w it's die. It's a good psu