SLK-800 - New version available!
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
SLK-800 - New version available!
There's a new version of the much loved SLK-800 available. It's called the "SLK-800(U)" and it incorporates the screw-on base of the SLK-900 onto the SLK-800 cooling unit. This will be good news to the AMD guys that are scared of hanging the heavy SLK-800 off of their socket lugs, but who have a MoBo that won't fit the SLK-900. Here you have the best of both worlds. It fits S478 too, for the P4 boys.
SVC has it in stock and it only costs $3 more than the regular SLK-800 and it's $12 less than the SLK-900.
SVC has it in stock and it only costs $3 more than the regular SLK-800 and it's $12 less than the SLK-900.
I saw the info on the new SLK-800(U) on SVC's site. Being new to this, I do not quite understand what the capability of bolting it through the motherboard entails. Once the old HS is removed, are the holes for the screws there, so no other modification is required? Or would this necessitate drilling my own holes through the motherboard? Going into the case doesn't bother me; starting to drill and modify DOES! Any info is appreciated.
Catcher24
Catcher24
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact:
The holes have to already be there!
Hello Catcher24:
The holes have to already be there, and there can't be any other obstructions, like capacitors, northbridge HS/fan, etc. You would have to pull the motherboard out of the case, and use the bolts and springs that are supplied. I'm not sure if there is a database of motherboards that fit this HS -- I know the Alpha PAL8045 does have this list.
The major advantages are: the thing won't fall off (unless you really whack it!) and it may cool the CPU a bit better due to better contact. The disadvantages are that it might not fit your motherboard, and it is harder to put it on.
The holes have to already be there, and there can't be any other obstructions, like capacitors, northbridge HS/fan, etc. You would have to pull the motherboard out of the case, and use the bolts and springs that are supplied. I'm not sure if there is a database of motherboards that fit this HS -- I know the Alpha PAL8045 does have this list.
The major advantages are: the thing won't fall off (unless you really whack it!) and it may cool the CPU a bit better due to better contact. The disadvantages are that it might not fit your motherboard, and it is harder to put it on.
Last edited by NeilBlanchard on Tue Mar 18, 2003 5:23 am, edited 1 time in total.
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
The main advantage of the 800U is that it fits a P4, pure and simple. Use of the bolt thru holes for AMD is actually a bit of a disadvantage these days because some board makers are already starting not to provide the 4 holes now that AMD no longer requires them in their spec.
(I've said this before: dumb, AMD, dumb! As their CPUs got hotter, Intel defined a form factor that allows for larger HS, and adopted the thru-board mounting holes concept from AMD. The smartest thing AMD could have done would have been to just adopt exactly the SAME form factor and mounting system as Intel. Instead, as their CPUs get ever hotter, they take away the mounting holes that allowed great coolers like the swiftechs and alphas to be devised. How are you going to cool a >3G XP without those mounting holes? um sorry for the rant It's frustrating to watch.)
Since they phased out the AX478, Thermalright have not had a P4 HS -- till the 900, but that is a high end solution not everyone will go for. The 800U allows them to reach into the P4 performance/value cooling market. Don't be surprised if you see a SK7U -- for the value aftermarket. It IS about $ aint it, guys?
(I've said this before: dumb, AMD, dumb! As their CPUs got hotter, Intel defined a form factor that allows for larger HS, and adopted the thru-board mounting holes concept from AMD. The smartest thing AMD could have done would have been to just adopt exactly the SAME form factor and mounting system as Intel. Instead, as their CPUs get ever hotter, they take away the mounting holes that allowed great coolers like the swiftechs and alphas to be devised. How are you going to cool a >3G XP without those mounting holes? um sorry for the rant It's frustrating to watch.)
Since they phased out the AX478, Thermalright have not had a P4 HS -- till the 900, but that is a high end solution not everyone will go for. The 800U allows them to reach into the P4 performance/value cooling market. Don't be surprised if you see a SK7U -- for the value aftermarket. It IS about $ aint it, guys?
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact:
The Opteron will have a new HS standard
Hi Mike:
There can't be too many AMD Socket A's w/o the four holes -- the biggest challenge if they do put the holes in is the space for the HS. The Alpha PAL8045 fits roughly 50-66% of the Socket A's (just a gues based on the list on their site. I agree it is silly for AMD to have dropped the holes from their standard.
I know the Opterons, and I'm pretty sure the Athlon64's will use a new style HS with a frame mounted on the mobo, similar to the P4. It may even be the same, but I'm not all that familiar with P4's...
http://www.coolermaster.com/news/k8/news0801_e.html
http://www.hardocp.com/article.html?art=MzAx
I got these links from: http://www.hardforums.com/showthread.ph ... did=440463
There can't be too many AMD Socket A's w/o the four holes -- the biggest challenge if they do put the holes in is the space for the HS. The Alpha PAL8045 fits roughly 50-66% of the Socket A's (just a gues based on the list on their site. I agree it is silly for AMD to have dropped the holes from their standard.
I know the Opterons, and I'm pretty sure the Athlon64's will use a new style HS with a frame mounted on the mobo, similar to the P4. It may even be the same, but I'm not all that familiar with P4's...
http://www.coolermaster.com/news/k8/news0801_e.html
http://www.hardocp.com/article.html?art=MzAx
I got these links from: http://www.hardforums.com/showthread.ph ... did=440463
Last edited by NeilBlanchard on Wed Mar 19, 2003 7:19 am, edited 1 time in total.
-
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
Not too many cases have them but they sure are handy. It's pretty darn easy to drill a set of holes in the right place before you put your case together. That makes it a snap to use the bolt-on HSFs.jhh wrote:Am I the only person who has mouting holes on their mobo TRAY? I'm not using them but they look like they'd line up with holes on the mobo if I had any.
I have an Asus P4PE also so I've been looking into this issue. Based on the pictures I've seen of the heatsink retention mechanism, the fins end up pointing towards the sides of the plastic retention shroud where the clips go in. On the P4PE this is front-to-back so your heatsink is mounted okay.bodosom wrote:My 900 is front-to-back on a P4PE. I hope I didn't put on backwards.gbass01 wrote:my main problem with the SLK900 mounting mechanism is the up-and-down orientation of the fins.
Has anyone mounted it thru-hole on a P4 motherboard? How is this done? Do you have to remove the plastic shroud (i.e. the thing that heatsinks usually clip onto) first or is there another set of holes? Do you need the foam rubber adhesive pads on CPU's that have the heat spreader?
I did some searching and I found this. http://139.95.253.213/SRVS/CGI-BIN/WEBC ... =obj(3494)
I'm not quite sure what this means for everyone.
I'm not quite sure what this means for everyone.
-
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
Well, at the minimum it means AMD certainly doesn't recommend ASIII.counterpt wrote:I did some searching and I found this. http://139.95.253.213/SRVS/CGI-BIN/WEBC ... =obj(3494)
I'm not quite sure what this means for everyone.
Does using ASIII void the warranty?? I sent AMD an email with this text:
"According to this page: http://139.95.253.213/SRVS/CGI-BIN/WEBC ... =obj(3494), AMD only recommends using the listed suppliers for PCM. I'm having a hard time finding anything like that and am wondering what will happen to my CPU warranty if I use a TIM like Artic Silver III or some other generic type of thermal compound? Will that void my warranty?"
We'll see what reply I get back. Stay tuned.....
Well ive seen LOTS of reviews that did tests where ac3 didnt do any better than the stock thermal compound. Infact there are several thermal paste roundup reviews on the net. And several of them claim that the thermal pad is just as good as anything you buy. There are however lots of people claiming 3-10degrees cooler using ac3 versus the stock thermal pad. So once again im confused on whether its best to save my money or buy the stupid ac3 goop.
-
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
The thing is that you can only use the stock pad once. If you pull your HSF off, you have to replace the old TIM with "something else". At that point you may as well use ASIII. Personally, I find that it's easier to clean off the unused thermal pad and use ASIII from the get-go then it is to clean off the melted-on pad after it's been used.