Hi Mike!
Sent you some money. Hopefully we can see some new fans in the future.
One thing I would really want answered is if its better to use a 140mm fan, instead of a 120mm one. People say it has been proven that using a 140mm fan is of no use. I just don't trust anyone but you for this type of information.
Thanks for a great site!
Donate: 120 & 140mm fan round-up
Re: Donate: 120 & 140mm fan round-up
Donated another 15$ for a 140mm fan round-up. I have long itched to read such a comparison on SPCR : )
Re: Donate: 120 & 140mm fan round-up
Hopefully Mike will post an answer. I would like to hear his thoughts on this matter.Bakkone wrote:One thing I would really want answered is if its better to use a 140mm fan, instead of a 120mm one.
Here is my much less authoritative thoughts on that question. I share that question with you. I have come up with only two plausible reasons.
1. There is just less competition in the 140mm space and with fewer competitors it has just worked out the 120mm market has produced some better winners (more entrants in the race)
2. The other reason is maybe give the viscosity of air, the scale of the motors, etc... that 120mm is just a sweet spot. (yes this is weak... but I am grasping at straws)
Anyways, neither of those may be the answer Mike comes up with. But I have been thinking about it. It is the best I have been able to come up with.
-
- Posts: 422
- Joined: Sun Jun 13, 2010 12:44 pm
- Location: Seattle
Re: Donate: 120 & 140mm fan round-up
For the 140mm fans, I nominate the following models:
Zaward's ZG2-140B
http://www.zaward.com/zaward-branding-products/zg2-140b
Be Quiet!'s Shadow Wings SW1 140mm 1000rpm
http://www.bequiet.com/en/casefans/264
Akasa's Apache Black
http://www.akasa.co.uk/update.php?tpl=p ... l=AK-FN062
All three are PWM models with 140mm mounting holes and I want to see how their unique blade designs compare.
Zaward's ZG2-140B
http://www.zaward.com/zaward-branding-products/zg2-140b
Be Quiet!'s Shadow Wings SW1 140mm 1000rpm
http://www.bequiet.com/en/casefans/264
Akasa's Apache Black
http://www.akasa.co.uk/update.php?tpl=p ... l=AK-FN062
All three are PWM models with 140mm mounting holes and I want to see how their unique blade designs compare.
Last edited by Fire-Flare on Thu Aug 09, 2012 7:16 am, edited 1 time in total.
Re: Donate: 120 & 140mm fan round-up
How much would it cost to have one fan in the round-up? I don't remember where I can find that piece of information.
-
- *Lifetime Patron*
- Posts: 2000
- Joined: Tue May 15, 2007 1:39 am
- Location: Finland
Re: Donate: 120 & 140mm fan round-up
The FAQ. viewtopic.php?f=32&t=58424. Right at the top of the subforum.kuzzia wrote:How much would it cost to have one fan in the round-up? I don't remember where I can find that piece of information.
Re: Donate: 120 & 140mm fan round-up
Thanks.Das_Saunamies wrote:The FAQ. viewtopic.php?f=32&t=58424. Right at the top of the subforum.kuzzia wrote:How much would it cost to have one fan in the round-up? I don't remember where I can find that piece of information.