My Silverstone Tj08-e build
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 11
- Joined: Wed Aug 22, 2007 12:18 pm
My Silverstone Tj08-e build
My Silverstone Tj08-e waiting for my sli cards and better cpu cooler
Rig Specs:
Core i5 cpu
8gb Corsair Vengeance
8500 GT Video Card
Thermaltake 850w PSU
OCZ Agility 3 120gb SSD
Slim Slot Loading dvd rw drive
Silverstone Tj08-e case
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Rig Specs:
Core i5 cpu
8gb Corsair Vengeance
8500 GT Video Card
Thermaltake 850w PSU
OCZ Agility 3 120gb SSD
Slim Slot Loading dvd rw drive
Silverstone Tj08-e case
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
-
- Posts: 346
- Joined: Mon Dec 28, 2009 1:42 am
- Location: Australia
Re: My Silverstone Tj08-e build
Nice and neat! What CPU cooler and video cards will you be installing?
Also, I notice that you rotated the 180mm intake fan so that the wires aren't as obvious. Was it hard to do, considering that the fan control switch would have still been connected?
Also, I notice that you rotated the 180mm intake fan so that the wires aren't as obvious. Was it hard to do, considering that the fan control switch would have still been connected?
Re: My Silverstone Tj08-e build
Very beautiful build.
You inspired me to do serious cable management on my TJ08B-E.
You inspired me to do serious cable management on my TJ08B-E.
Re: My Silverstone Tj08-e build
You probably don't want to after all that cable tying, but it seems to me with this build you could turn the powersupply around so that its intake faces downwards, without much difference in fan noise. The reason for doing that would be to avoid having an essentially open powersupply where anything coming down from above could touch mains power leads, a case design with inherent dangers rarely found in computers. One could of course put something like a muffler construct on top of the case for protection as well as some noise dampening.
Edit: I missed the upcoming SLI config. Nevermind.
Edit: I missed the upcoming SLI config. Nevermind.
Last edited by mkk on Thu Aug 23, 2012 6:24 pm, edited 1 time in total.
Re: My Silverstone Tj08-e build
nice
Will be interesting to see temps with the SLI (which card btw ?)
Will be interesting to see temps with the SLI (which card btw ?)
Re: My Silverstone Tj08-e build
Nice build, very clean cabling!
Where did you get that slim slot-in optical bracket?
I've been searching for one for ages!
Where did you get that slim slot-in optical bracket?
I've been searching for one for ages!
-
- Posts: 259
- Joined: Mon Jun 26, 2006 4:58 pm
- Location: Markham, Canada
Re: My Silverstone Tj08-e build
http://www.silverstonetek.com/product.p ... 26&area=enboost wrote:Nice build, very clean cabling!
Where did you get that slim slot-in optical bracket?
I've been searching for one for ages!
Re: My Silverstone Tj08-e build
Some of the images arent up anymore. You should put them on imgur or minus.sladesurfer wrote:My Silverstone Tj08-e waiting for my sli cards and better cpu cooler
Rig Specs:
Core i5 cpu
8gb Corsair Vengeance
8500 GT Video Card
Thermaltake 850w PSU
OCZ Agility 3 120gb SSD
Slim Slot Loading dvd rw drive
Silverstone Tj08-e case
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us