the cables are fully modular and with the short cable set ( optional / bought separate ) you save a lot of space, also this psu fan runs faster at idle which is important because it acts as a better exhaust fan than my previous seasonic 430 which dropped internal temps a lot How many degrees the te...

After 3 cpu's, 5 coolers, 2 Psu's, 2 VGA's and 2 motherboards with my PC-Q11 here is what i settled on: 1-Asrock Z68 motherboard or H67 ( very good fan control) 2- 2600S I-7 3- silverstone strider plus 500W fully modular psu with SilverStone PP05 Short Cable for PSU Set: the cables are fully modular...

Try this MB if you're thinking about the chenbro !

Supermicro X7SPA-H-O Atom D510/ Intel ICH9R/ RAID/ V&2GbE/ Mini-ITX Motherboard

http://www.newegg.com/Product/Product.a ... 0X7SPA-H-O

Hi all I just finished converting my nsk1380 to a file sever with 4 hard drives (by installing the 4th in place of the ODD. It just hit me then, antec -being a favorite among many forum readers- should bring a small chaises close to the size of the nsk1380 that can house at least 4 soft mounted hard...

Some CPUs are cooler/hotter than others! The solo is a well vented case, but to be sure i'd sat go for a arctic cooling freezer 7 pro i used it in a solo with a C2Quad 950 its silent, cheap and effective!

BillyBuerger:

Thanks for the Tip, I did get my NSK1480 from vally seek. amazing case, fits my bill just right, replaced the tricools with scythe Kama-flex 80's
BUT the power supply needs the fan swab, so i was wondering what kind of fan size did the power supply use and what size did you use?

Talal

Hi Just wanted to say that I was disappointed with the new P183, in regard for the top mounted fan. I owned many Antec cases including a solo, P182, and currently a mini P180. And I personally felt what Mike chin mentioned in his review of the mini p180: it simply has a superior cooling compared to ...

Link:


http://www.engadget.com/2008/06/02/west ... aptop-hdd/


VelociRabtor Junior ?

I tryed 2 Q9300s and 1 X3350 and 2 E8400s and an E7200 on the same motherboard (P5E-VM HDMI) and the same heat sink (TRUE 120) and i can tell you theres somthing funny with those new 45nm cpu's, one Q9300 and one E8400 were ideling at around 52 Mb sensor real temp confirmed that at least some of the...

Does anyone know what happened to the NSK1480? It seems to have come to market very briefly and then disappeared.
newegg has deactivated it
Most other shops are showing it as "out of stock"
has it been canceled?

Well I have a retail Tri-Cool, and it refuses to start on much less than 12V, no matter what position the little switch is in. I don't know if all Tri-Cools act this way, but it stops me from using the things. :( I tryed 2 samples of retail Tricools -sleeve type- and they work down to around 8 volt...

http://img87.imageshack.us/img87/7374/tricoolinminip180rx6.th.jpg I have both the mini P180 and P182, after lots of experiments I came to the conclusion that in a quite room you need the 120mm fans to be around 850~900 RBM to be really quite! problem is that the standard tricool that comes with the...

why do you think your mosfets need extra cooling? is the board unstable? Just to be sure.. as i'll be using the board with an overclocked Quad in a case with slow fans, and since i've upgraded the cooling for most other parts of the board and my IR thermometer is telling me that -when prime testing...

psiu wrote:May as well do em all.

ya i could do that!! but beside the fact that i would need another pack of heatsinks, i m afraid i might create clearance issues with my cpu cooler !

Hi

Need help figuring which mosfits should i apply those tiny heat sinks you see on the side of the ASUS P5E VM HDMI mother board !!
should i apply on all 16 or just some of them?

Thanks

[/img]

Hi

Found a website that has some detailed pics for the mini p180

http://www.links.co.jp/html/press2/news ... 0.html[url]

Talal

Actually: I'm thinking that i could cut the extra cables and only keep the ones that are going to be used, i'd like to know the clearance between the ODD and the power supply would allow the wiring to pass Down to the MB?

oh and both my Drives will Have Sata connection!

Talal

Wow!!

Thanx Erssa

Could you by any chance post a pic showing the clearance between the PSU and the optical drive (when the ODD is installed)



Talal

Hi Erssa

I Have a spare seasonic S12 430 PSU and plan to use it with the NSK3400 when it becomes available.

I was wondering if there is enough space for 2 optical drives + PSU+ PSU Cables to Fit in the upper compartment?

Thanks
Talal

I know that lots of you guys -My self included- have been waiting for a full featured matx mobo to go with intels new core2!!



http://forums.vr-zone.com/showthread.php?t=150924

Enjoy!

Scrool down to the life style section of the antec 2006 catalog.
From the picture, and comparing the specs this looks like a black P 150

http://syndicate.tentoe.com/__FileManag ... ED.web.pdf

Hi everyone, well the 'Subject' askes it all..... I've done some reading, but I'd like to confirm one question..... Will a Thurmalright XP-120 topped with a Nexus 120 (Orange) fan be enough to cool a P4 3.2Ghz Prescott ??? And if not, is there a better choice ??? Also, if you don't mind..... Can so...

Thought this might of some intrest!


http://www.vr-zone.com/?i=2098&s=1

Hi all Thanks for the great forum!!! after reading Abbout the S12 430 i'm convenced That it's right for my current setup but what about afew months when i 'd like upgrade to intel's New 8XX dual cores? Thanks MY current setup: Intel 640@ 3.6mhz Asus 925XE corsair 512*2 DDR2 675 @600mhz Samsung sata ...