I went from silver and warped to black and beautiful. (2 sides and the front panel)
Yep, Send in that invoice copy.

Antec P180 rocks!
And their tech support is almost as great!

Thats probably is the best bet. Either a good portable room air cleaner, and or (both) whole house filter on the furnace.
But admire the filter you got on your rig, your on the right path.

Would be nice if an electrostatic/negative charged ion filter could be used somehow, safely!

The power LED is fully visible with door closed (not obstructed by door) And the hard drive LED is bright enough so it can be seen flickering through the side vent with door closed, depending upon the angle. Also with the lights off in the dark, it flickers so bright through the vent that it reminds...

Some of those anti-static wipes (and or sprays) should do the trick well safely.

That was the easiest piece of hardware to install,(besides the other drives & fans)for me!
Just use a little finesse, and a steady hand helps.
Actually, I could have done it drunk

IF you really can't stand the noise, you could also of course relocate the PC to another room, basement or even garage, and or operate it by remote using adequate cable lengths.

These are the best replacement fans for the money...http://www.jab-tech.com/YATE-LOON-120mm ... -3472.html

However, there are some who claim that they can't get enough RP's out of them.
I think I will stick with the stock for now.

Reminds me of my old Supermicro,..http://www.virtual-hideout.net/reviews/ ... ro_sc750a/

Its still a great case that stood the test of time.
Maybe I should resurrect it one more time?
I slapped a set of castors on it, at least it pushes nice now.
The fans are a little loud though.

Maybe equipped with a fanless and very quiet, ultrachill water cool? (Or the provisions for it) Would be a nice start to a new series, (or an end) to a great line of cases.

Wheres the pics? A remote on/off switch woud be nice...
Let me guess, Twice as heavy & heavily armored!

Very nice. And yes, The company will sell you the window if you send in the side panel... No sorry we do not have panels to sell. You can send yours in for a window for $69 plus return shipping. Best Regards, Hank Baron Performance PC's, Inc. 2600 Kirby Cr. NE Unit #1 Palm Bay, FL 32905 Seems to be ...

Yeah, The Loons are good for the $, no question.

http://www.coolerguys.com/840556021537.html

I heard the Yates are the way to go, directly into the motherboard would be logical..
I myself am considering any 120mm fan(s) So long as it has three wires and plugs into the mobo headers.

The P180b/black, is still available. Not quite a collectors item yet...

http://www.zipzoomfly.com/jsp/ProductDe ... ode=140138

A few others have them too.

Hmmm? I was wondering about that.
May very well be time soon for a P190, or P200 series?

Well, they changed the bands, you can call Antec and get replacements. Do a search, there's plenty of threads around.

Either that, or else Antec needs to incorporate and deploy "mini air bags", or "safety nets" near the bottom of the case!

The P180 looks great with a window too. And for those of you who already have the P180 and want a window... No sorry we do not have panels to sell. You can send yours in for a window for $69 plus return shipping. Best Regards, Hank Baron Performance PC's, Inc. 2600 Kirby Cr. NE Unit #1 Palm Bay, FL ...

P180 w/bolt on window?
http://www.performance-pcs.com/catalog/ ... ts_id=3304

Thats new to me! The 180 is a nice sturdy quiet case.
Go for it! Unless you can find a cheaper P160. Let your pocketbook be your guide.

A P180 with a window? Hmmm? That would be defeating the purpose of an already great case. I don't think that it is meant to have a window anyway. But I guess anythings possible? The P160 might be a nice compromise, it is lighter, albeit slightly noisier though. If you have the resources I would reco...

Well, Its a matter of taste and opinion.
However, I had the silver until Antec sent me the new front panel and sides in black (panels warped) and to me it now looks more warm, bold, and elegant in black.
Its like a black sportscar, etc.

Ooops, I forgot to mention that it is also an extremely "cool" case!
There, now I feel better.

The Antec P180, is an excellent case for the money. All the bugs have been worked out. It is fully configurable, clean & quiet.
And YES! I would definitely buy one, either as my main case or a brand new upgrade.
The only minus is that its heavy, but I can deal w/that.

And, yes, the old and new bezels are virtually identical, except the power button is magnetic.
I just checked

You may have to get back to them on that.
When I ordered mine, they referred to it as a "front panel"
I too was wondering if they would have sent me the bezel attached but they did.
Just write them back and explain to them you need the bezel as well, since they are a matched set with the door.

Just got my front door w/bezel, and the two side panels.
Went from warped and silver to black and beautiful!
I had to say it one more time,...Thanks Antec!

Just got my new front door (w/bezel) & side panels, and just discovered how beautiful black can be! Its a nice transition from the old silver panels wit da warp! I strongly advise everyone who has warped panels to request a new set, and try black for a nice change. And they also fit nice and tight! ...

That very well may be not only the best, but only alternative(s)
Case closed!

Heres another link. I still can't find the ultimate castor...
Looking for some smallish ones. Went to a hardware store and nota.
Everything seems too big and clumsy for a small case design?

http://www.plasticwheels.com/technical.htm