that ASRock Fatal1ty board and a new i7 7700k Are they compatible? I knew you need a Z270 board for the K CPUs. I think they both support the 7700k http://www.asrock.com/MB/Intel/Fatal1ty%20B250M%20Performance/index.asp#CPU but since you bring it up, I'm open to suggestions as to which of all these...

Cool. I'll probably get that ASRock Fatal1ty board and a new i7 7700k, try it out using the onboard triple monitor support and if I don't like that can always put my two hd4670s on it. Thanks for the input.

you know i've never really consdered igp, but will now. price is no issue, but the absolute snappiest video performance is, which is why i've gone with video cards. i would not want to go with igp if it was in any way slower than a vid card.. anyone have a motherboard recommendation? Btw it needs to...

plan is to upgrade everything but the power supply

Thanks. That Palit card looks perfect. The only mini hdmi to dvi cable i can find with reviews though is one by Startech and the reviews are pretty bad, so need to research that some more

I have three monitors so I'm gonna need a video card. Just want to know if there is faster one than these HD4670s.

I'm about to upgrade my desktop system but am not sure there is a better video card solution than what I already have, but figured I'd ask. My requirements are: need either dual dvi or dvi+vga, passive cooled, low-ish power at idle. I've been using two Sapphire fanless hd4670s for many years and am ...

Here are my results of two sets of fans at different voltages. Note they are idle temps which does not say much, but my machine does not have much load on it throughout the day. 2x120mm coolermaster, 5v = 33C 2x120mm coolermaster, 7v = 33C 2x120mm coolermaster, 12v = 30C 2x140mm oem, 12v = 28C 2x140...

sorry to hear that

http://www.sevenforums.com/hardware-dev ... post370737

its horizontal so it does not have much to do other than keep it from tipping over

the width of the notch should be the same as the width of the hole

not to assume anything. how does this align holes when you screw into backplate? thx it allows the Thermalright 775 bracket to fit onto the Prolimatech backplate, otherwise the 775 bracket would not align with the backplate holes it does not align holes. You put the screw through the notch you crea...

ckoons1 wrote:are you saying to put a notch from the outer edge to the hole? am i understanding this correctly?
thx

yes that's right. See pic

Just measured idle power for my rig - 8W for two 4670 cards versus none - 4W each

How about noise with the stock cooler under load and idle? noise is not audible with the 5v panaflo regardless of heatsink. I do not have the fan set up to run at a higher speed at load Sorry, I meant with the stock heatsink and fan. I was wondering how loud it was idle and under load with the orig...

trueg wrote:How about noise with the stock cooler under load and idle?

noise is not audible with the 5v panaflo regardless of heatsink. I do not have the fan set up to run at a higher speed at load

This 4670 looks quite interesting. I wonder why it's not sold more heavily, slap a big GREEN label on it at least should give it a push. Do you think it's better to get the Sapphire and then try to fit some sort of passive heatsink to it, than buy one pre-built? I gather that the factory passive I ...

I'm also debating between the 4670 and 9600GT. I currently have an 8600GT with passive cooling. My goal is a fairly powerful card that has low temp and low power idle. Did you end up purchasing a 4670? What do you think so far? Another alternative is a DDR3 Geforce 220. Costs less and has lower pow...

Just wanted to give my support to the Sapphire HD 4670 Ultimate. I have two of them and they have excellent clock/voltage control so idle power is maybe 10W per card. Their heatsink is excellent - I replaced it with an Accelero S2 I had laying around and the temps went up by 2C, so I switched back.

In case anyone wants to know, I got this working by buying a Prolimatech Megahalems Socket LGA 1156 mounting kit ($7) and using its backplate along with the 775 bracket that came with the ifx-14. I had to use a dremel to cut a tiny notch in the ends of the 775 bracket, because without it the 775 bra...

Increased bAsorptioln of Iron Decreased Absorption of Iron. ASSESS YOUR STRESS, BNURM YOUR FAT 69. In contrast to fay, muscle reqiures a lot fo energy to build, requires a olt of energy to - Motilium tablets http://78.24.220.30/82.12.80.217/motilium/1.gif Jim thankse again for posting some great ph...

Thanks. I borrowed a 4670 from a friend and put my accelero S2 on it - my system has no case and sits horizontally and the 4670 is running fanless right now, very stable, temp is 55C at load. At idle the card is only about 10W using my kill-a-watt, not sure about at load. Think I'll pick one up.

My processing requirements are in the range of the 9600/4670. I have been happy with the accelero S1 on various cards for some time, usually with an undervolted fan. There are many fanless models out there, but it seems that most are not as effective as an accelero s1. Anyone know of a fanless 4670/...

andyb wrote:Can you explain why you need something that is PCI.??? I am wondering if a new system is in order.
Andy

I need 4 monitors - the way I have been doing that is with one agp or pci-e card for monitors 1 and 2 and then a pci card for monitors 3 and 4

I am building a new 4-monitor PC and want to find something that supports two monitors and is faster than the Nvidia 6200 PCI. It needs to run in a PCI (NOT pci-e) slot.

Performance and price do not matter, I just want to investigate my options of newer cards that run in a PCI slot. Thanks

Well I could not resist the deal at Fry's (160GB for $49 after rebate) so i went and got it hoping it would not be one of the meowers. Some people had said theirs made the meow sound and others said they did not notice it. I hooked it up and listened to it closely with the case cover off and sure en...

hofffam that page looks good, thanks. The walkman amp may work, though the wattage may be too low. Or hopefully I can figure out how to use one of the more powerful devices there..

sthayashi that audigy would be perfect if it had amplified output, but I don't see that it does.

Interesting that you say especially French when talking about other languages that English is bokrrowed from. I took French, and later toko German, I found German translated umch more preci. Slow release Metformin tablets http://62.109.4.180/61.142.213.158/metformin/1.gif 3. My years of experijence...

I am looking for fans like in the subject line. I prefer not to undervolt since I want the lights to be bright and am not interested in re-wiring the led wires to 12v and running the fan motors at 5v/7v. A 2000rpm fan will be fine for my daughter's new windowed case, but I do not know where online t...