vapb400 wrote:How quite is the AquaXtreme?

Unfortunately, sound is variable from person to person. I have isolated the pump, and its as quiet as my OCZ Powerstream PSU and my 120mm Globe fans.

Edward Ng wrote:I'm going to ask that you please shrink them down to a smaller size for this forum page, and then link to the full size versions of the images.

This is simply forum regulations.

All images within the forums must be ~500 or fewer pixels in width.

-Ed

Done

GPU1 : Half-Life 2 for 15 mins with SLI enabled... http://img.photobucket.com/albums/v316/Joshaze/desktopsm.jpg Click for full size image. GPU1 : Prime95 + RTHDRIBL for 20 Minutes... http://img.photobucket.com/albums/v316/Joshaze/load1sm.jpg Click for full size image. GPU2 : Prime95 + RTHDRIBL for ...

Few more pics right before I started her up for the first time... http://img.photobucket.com/albums/v316/Joshaze/A0-006.jpg http://img.photobucket.com/albums/v316/Joshaze/A0-010.jpg http://img.photobucket.com/albums/v316/Joshaze/A0-005sm.jpg http://img.photobucket.com/albums/v316/Joshaze/A0-007sm.jp...

Idle Temps (nTune)... http://img.photobucket.com/albums/v316/Joshaze/IdleTempsm.jpg Single GPU Load Temps (Running RTHDRIBL & nTune)... http://img.photobucket.com/albums/v316/Joshaze/1GPUBurnsm.jpg Highest GPU Temp (Display Properties) Note that the ambient (RAM) temp is higher than the GPU! http:/...

Looks sweet... What're temps like, and how's it sound? :wink: I noticed your board has two slots separating the two PCI-Express 16X slots; do you believe that on a board where the two slots are separated by only one slot, SLI would still be doable with Danger Den Maze 4s? I see that the bolts are q...

More Pics... http://img.photobucket.com/albums/v316/Joshaze/A011sm.jpg http://img.photobucket.com/albums/v316/Joshaze/A012sm.jpg http://img.photobucket.com/albums/v316/Joshaze/A013sm.jpg http://img.photobucket.com/albums/v316/Joshaze/A014sm.jpg http://img.photobucket.com/albums/v316/Joshaze/A015.jpg...

Pics... http://img.photobucket.com/albums/v316/Joshaze/A001sm.jpg http://img.photobucket.com/albums/v316/Joshaze/A002sm.jpg http://img.photobucket.com/albums/v316/Joshaze/A004sm.jpg http://img.photobucket.com/albums/v316/Joshaze/A005sm.jpg http://img.photobucket.com/albums/v316/Joshaze/A006sm.jpg

I installed the MCX159 on the chipset, removed the secondary PSU, and cleaned up the wiring a little...

Well my parts have arrived... Now I just have to go get plumbers tape and the motivation to install all this stuff. http://img.photobucket.com/albums/v316/Joshaze/50zasm.jpg http://img.photobucket.com/albums/v316/Joshaze/50zbsm.jpg http://img.photobucket.com/albums/v316/Joshaze/BIPasm.jpg http://img...

Well I finally committed and went ahead and ordered the following parts for this setup: http://img.photobucket.com/albums/v316/Joshaze/50Z-MCW6002-2Maze4-2BIP.jpg http://www.sidewindercomputers.com ------------------------------------------------------------------------------------------------------...

DryFire wrote:edit: you should have the pump drawing water from teh res not pumping it into it. you may want to mout the 50z on it's back and roate the housing so you can do that.

Thanks, I updated the pic.

sthayashi wrote:Err... I don't quite follow.

Are you looking for 24-pin-to-20-pin converter, or a 20-pin-to-24-pin converter?

I'm not exactly sure what I'm looking at for your posted picture.

I am running two Power Supplies in my system and this cable would power on the second PSU with the first.

I am looking for one of these...



...But no one seems to carry them online.

My main PSU and Mobo are 24-pin and my secondary unit is 20-pin.

Does anyone know where I can buy one of these?

ARGH! Decisions, Decisions... Here's another setup... I can't decide... I think this might be it unless someone sees a problem with it: http://img.photobucket.com/albums/v316/Joshaze/50Z-MCW6002-2Maze4-2BIP.jpg These radiators are low resistance, I'm pressed for room, and you guys think that a singl...

DryFire wrote:I would keep the dual loop setup but use ddc's instead.

I just found a recording of the MCP600/50z and it seems farily quiet ARGH!...

http://www.lokaluxagenda.lu/XS/MCP600.avi versus http://www.lokaluxagenda.lu/XS/MCP650-DD-D4.avi

1. Do you want your new computer to be sort of not too noisy or do you want it really quiet? 2. Are you going to overclock it? 3. How much extra time are you willing to spend reaching these goals? 4. Money seems to be no object. 5. Are you willing to mod the case with a dremel? 1. Right now the noi...

I just completed the first mod on my new case... Here's something for those of you that might think my OCZ PowerStream 520 power supply wont be able to supply enough power for my rig... http://img.photobucket.com/albums/v316/Joshaze/PSUMod2sm.jpg http://img.photobucket.com/albums/v316/Joshaze/PSUMod...

Why not have a dual 120mm fan heater core and run everything on one loop with 1 or 2 ddc's. For some reason i think one ddc should keep acceptable flowrates for the system though i'm not sure why, but i doubt it. also mount the fans on teh bottom of teh radiator so you have a pull situation not a p...

I can only answer number 5: Your computer obviously owns, but it isn't going to be very quiet. Okay, how about this... http://pics.apartment808.com/users/Joshaze/h2o3.jpg Components: 2 x Danger Den Maze4 GPU blocks (acetal top) Danger Den DDC-12V pump with 3/8" OD fittings Black Ice Pro Radiator wi...

System components: Lian-Li PC7077B full-tower case OCZ Powerstream 520watt power supply Asus A8N-SLI Socket-939 motherboard AMD Athlon FX-55 CPU 1GB OCZ PC3200 Platinum Rev2 memory 2 BFG Nvidia 6800 GT PCI-E graphics cards SoundBlaster Audigy 2 sound card Western Digital 74GB Raptor hard drive Plex...

I have been looking to buy 3 x 120mm and 3 x 92mm fans for my new Chenbro SR107 server case. The case arrived with some very loud Delta fans that I have on fanmates at the moment but I am having to turn them almost all the way down and they are proving very little airflow. I do not need a silent com...

Ralf Hutter wrote:Round Rock. Isn't that the home of Dell?

Yeppers, that's where I work...

Hello all, I have been lurking for several months now and have decided to join the forums. I have been looking for a quiet and efficient case for a little while now but haven't really found what I am looking for. I was at the Chenbro website looking at the Xpider Case and happened upon their Server/...