Thank you! I'll order one from SVC later tonight. I would have bought one of the Revision 1 coolers for $13.99 but those don't support the Radeon 9600 Pro. :( Wait! Neither does Rev 2, and you're obviously aware of that since you said Rev 3 in your poll. Rev 2 adds support for the AIW cards I belie...

I prefer the VGA Silencer as I feel a little extra noise and exhausting the hot air from graphics card out of the case is preferable to having a silent heatpipe then having the hot air sit around in the case. You might have to wait a while too. Rev 2 coolers seem to be only just coming out. BTW SVC...

Well, SpeedFan has tackled my 92mm Panaflo M1A and my Cooler Master 80mm Blue LED Fan and my Fortron 350w Aurora is already non-audible so that leaves my noisy Radeon 9600 Pro to be quieted down. What option do you think is best? It is overclocked to 465/310 right now. Cheaper is better. ;) I am fav...

Ralf Hutter wrote:

PorBleemo wrote: You can find Ralf Hutter at the Anandtech Forums also, he doesn't post there much though.

-Por

Yeah, I've only got 2500+ posts over at AT. I sort of "speed surf" over there....

:cookie;

I'm crunching F@H for TeAm Anandtech to pass you people up or hold the lead.

PorBleemo...are you the same PorBleemo as that of Anand forum fame? :) I'm EddNog over at Anand. -Ed Of course I am! :) Lots of people have one online profile. You can find Ralf Hutter at the Anandtech Forums also, he doesn't post there much though. And I didn't know I had fame over there. I though...

I'm looking for a solid fan controller to quiet down a Cooler Master Rifle Bearing Blue LED 80mm fan and a Panaflo M1a 92mm (not as much on this fan though). Any good suggestions? Long cables (so I can keep them tucked out of sight) would be appreciated.

Thank you!

-Por

This doesn't work anymore for the Abit NF7-S with BIOS 22. Fan control and monitoring works but not anything else. I does work with BIOS 21 though.

-Por

Actually, does anyone know if the non-LED model is quieter then the LED model? My friend has the non-LED model and it is very quiet but the 12v rail drops to 11.85v idling and I think this might be bad.

-Por

I looked at the other recommended power supplies but none of them have a large fan for taking air away from the CPU. However I already have two 80mm fans doing that.

In this case would it be better to buy the Fortron and maybe install a 120mm L1a in it or get a Seasonic PSU instead?

-Por

JimK wrote:My 60PN does NOT have a "fans only" plug.

Jim

That's a bummer. So, is there a model that does (and still somewhat cheap) or should I buy a Rheobus along with it?

-Por

1. Processor is good. 2. For overclocking Mushkin Level II PC3500 or Kingston HyperX PC3500 are highly rated and used. 3. The Asus K8V has more features and more features (like Quiet 'n Cool underclocking/throttling) work on it. CAS Latency doesn't matter, there's a 3Fps difference between 3-4-4-8 a...

Looks like a Fortron rip-off to me...

-Por

I'm looking for a new power supply and I'm thinking about the Fortron FSP350W-60NP. It would be powering... Athlon XP 3200+ Abit NF7-S (can't wait to try that FSB throttling program! :)) 512MB OCZ PC3200 Radeon 9600 Pro NEC FireWire PCI Card Maxtor DiamondMax 9+ Lite-On LDW-401S DVD+RW Four case fan...

I am also looking to mod my True330. So I take it that the best method is a 92mm L1A input and an 80mm M1A output?

Sorry for my silent PC newbiness!

-Por

No need - I've got an LED fan undervolted to about 5v or so, and it's fine - the LEDs still glow, just not as brightly. No idea why, but it works fine. This depends on the design of the fan; some stop illuminating near 10 V... Cheers, Jan This is a CoolerMaster 80mm fan with 4 Blue LEDs if that hel...

Hello: Over at Dan's Data is a review of a fairly unusual PS with two 80mm fans with straight through air flow -- and lots of gawdy green parts and a clear window and blue lights: http://www.dansdata.com/quickshot016.htm http://www.dansdata.com/images/gtr450wli/450wli640.jpg So it has lots of show ...

This looks to be a reallly promising program. Too bad I have an Asus A7N8X-X. :( What would be really cool is if SpeedFan was integrated into this. Then I could have it set my 3200's FSB to 100Mhz, lower the VCore and turn off the processor fan. :) Now that would be seriously impressive. I don't kno...

Forgive my n00b questions, but what does this do - underclock your PC wile its idling? One of the pieces of software utilizes the PowerNow! feature on mobile processors (which can be enabled on the desktop varients by circuting an bridge) to dynamically change the FSB, Multiplier and Voltage on the...

Perhaps a better method would be to get rid of the fan and just get some LED clusters? Fans look cool though but I don't know how to power the LEDs seperately so I can slow the fan speed.

-Por

What would you the reccommend to control the case fans? I'm trying to operate on a low budget so items that fit that range would be appreciated.

-Por

But if I get rid of the Antec PSU my case fans are not RPM controlled.

Hello! I recently built an Athlon XP 3200+ system but I want to make it quieter then it is. Here is what I have in it. Athlon XP 3200+ Swiftech MCX462-V Heatsink Panaflo M1a 92mm Antec TruePower 330w One 92mm fan (standard) One 80mm fan (standard) Three 5v 80mm fans in case (not audible) CoolerMaste...