Search found 102 matches
- Wed Jul 23, 2008 1:53 pm
- Forum: SPCR Announcements
- Topic: 2008 SPCR facility/equipment upgrades: hemi-anechoic chamber
- Replies: 151
- Views: 368114
Hey Mike, I just quickly browsed through the thread, so I'm not sure if it has been mentioned before, but maybe isolating a platform on which you can do your measurements with bungee cords might help. That's what a lot of research labs do to eliminate vibrations for atomic force microscope measureme...
- Wed Jan 09, 2008 7:37 pm
- Forum: CPUs and Motherboards
- Topic: GA-G33M-S2H mATX C2D board
- Replies: 36
- Views: 28205
- Wed Aug 22, 2007 12:24 am
- Forum: CPUs and Motherboards
- Topic: E2140 & P5K-VM - Undervolted, overclocked!
- Replies: 27
- Views: 25214
You are in a forum about silent pc. ;) So it would be nice if you also report idle or/and full load power consumption I know, I wanted to include that too but I was to lazy to crawl under my desk and look at the power meter =) You get the power consumption in a few minutes. Edit: 139W@ 3080 Mhz loa...
- Mon Aug 20, 2007 12:15 pm
- Forum: CPUs and Motherboards
- Topic: E2140 & P5K-VM - Undervolted, overclocked!
- Replies: 27
- Views: 25214
So here is my data: Model No – E2140 Stepping – L2 VID – 1.325V Minimum Vcore at stock speed – 0,9V (BIOS) Maximum O/C at stock VCore – 3.140 GHz (390x8) Maximum O/C – 3.295 GHz (411x8), 1.45V (BIOS) Stress testing – Orthos, 2 hours DTS Temperatures – Idle/Orthos (40/60) Speedfan CPU...
- Sun Aug 19, 2007 2:23 pm
- Forum: CPUs and Motherboards
- Topic: E2140 & P5K-VM - Undervolted, overclocked!
- Replies: 27
- Views: 25214
Bought a E2140 too. It runs with 3200 Mhz (8*400 Mhz) at 1,34V Vcore. I didn't have the time to do more testing. But I'm gonna try to fill out the information you are interested in smillingcrow. This E2140 is crazy, 100 % overclocking for 60€. But the 1 MB Cache is really a drawback for folding@ho...
- Sun Aug 19, 2007 1:33 pm
- Forum: SPCR's Folding@Home
- Topic: SPCR Folds Team Blog
- Replies: 1664
- Views: 1646653
So I just upgraded one of my computers. Hopefully my folding output will increase a little bit, but my fathers QX6700 isn't folding at the moment so my PPD took a big hit. I bought a new E2140 for 60€ and it's a crazy CPU. On stock settings it runs with 1,6 Ghz and 1,325V Vcore but with a slight V...
- Sat Jul 21, 2007 3:30 am
- Forum: SPCR's Folding@Home
- Topic: What are your points per [day per] watt (PP[DP]W)?
- Replies: 38
- Views: 32274
- Fri Jul 20, 2007 4:32 am
- Forum: SPCR's Folding@Home
- Topic: What are your points per [day per] watt (PP[DP]W)?
- Replies: 38
- Views: 32274
What are your points per [day per] watt (PP[DP]W)?
Coming from the other thread, I think it would be great if everyone could post his ppdw. Edit: I should have been a bit more accurate. I posted my points per day per watt, not the points per watt. Excellent, I would love to know everyone's ppw. That would be great green race. I just checked my foldi...
- Fri Jul 20, 2007 3:09 am
- Forum: SPCR's Folding@Home
- Topic: SPCR Folds Team Blog
- Replies: 1664
- Views: 1646653
I hate those 1500 point WUs (2610), they take longer than the 1700 pointers. The 2652 WU is even worse. It is slow as hell. I only get around 1860 PPD with the QX6700. I'm so tempted to buy a new cpu. I still have a P5B-VM Mainboard laying around which could replace my old Athlon XP setup. Well I w...
- Thu Jul 19, 2007 12:59 pm
- Forum: SPCR's Folding@Home
- Topic: SPCR Folds Team Blog
- Replies: 1664
- Views: 1646653
it doesn't resume? strange...I've used the smp client in linux, in linux through Vmware, and in windows. The vmware isn't much more efficient than using the windows smp client. native linux is surely the best, but I can't undervolt in linux. I'm not sure what you mean though. I start and stop the c...
- Thu Jul 19, 2007 10:00 am
- Forum: SPCR's Folding@Home
- Topic: Folding machine
- Replies: 14
- Views: 9917
- Mon Jul 16, 2007 7:38 am
- Forum: SPCR's Folding@Home
- Topic: Problems with Windows SMP client
- Replies: 2
- Views: 3165
Hi! I'm not sure about your error. But here are some things which can be a problem with the SMP Client. Did you run the install.bat? Did it show those lines at the end twice? Do you have admin rights? Does your account have a password? I just checked the folding forum. Here is a thread about error 6...
- Wed Jul 11, 2007 1:03 pm
- Forum: SPCR's Folding@Home
- Topic: SPCR Folds Team Blog
- Replies: 1664
- Views: 1646653
I don't want to run the Windows SMP client because it doesn't support resuming and the computer isn't running 24/7. Aha,so SMP client only appropriate for 24/7 PCs? so basically an SMP Folding machine has to have a huge CPU folding all the time....huge leccy bill here I come :cry: Not when you're u...
- Wed Jul 11, 2007 11:31 am
- Forum: SPCR's Folding@Home
- Topic: SPCR Folds Team Blog
- Replies: 1664
- Views: 1646653
Well looks like I have to increase my PPD otherwise Plissken is going to pass me in the near future. =) You guys running the SMP Client under VMWare, how much RAM is each client using? I have a QX6700 here and I'm running two virtual machines with around 700 MB Ram and I'm wondering if it's enough....
- Wed Jul 11, 2007 8:06 am
- Forum: SPCR's Folding@Home
- Topic: SPCR Folds Team Blog
- Replies: 1664
- Views: 1646653
Well looks like I have to increase my PPD otherwise Plissken is going to pass me in the near future. =) You guys running the SMP Client under VMWare, how much RAM is each client using? I have a QX6700 here and I'm running two virtual machines with around 700 MB Ram and I'm wondering if it's enough. ...
- Tue Jan 30, 2007 5:55 am
- Forum: System Advice / Troubleshooting
- Topic: HTPC C2D in NSK1300... frustrated!
- Replies: 5
- Views: 4989
Just so you'd know. The P5B-VM does indeed have no DVI ports. There are however DVI add-on cards for motherboards that use the 965 chipset, called ADD2 cards. They are nothing more than just a PCIe card with one or two DVI ports. No fancy hardware. Wintec and Asus are just two of the many companies...
- Sun Jan 28, 2007 1:08 pm
- Forum: System Advice / Troubleshooting
- Topic: HTPC C2D in NSK1300... frustrated!
- Replies: 5
- Views: 4989
Re: integrated video
doesn't the P5B-vm come with integrated video?? maybe ditch the 7300Gs and just try the integrated video, or if you keep the card, see if you can disable the onboard video so it's not using power Well the P5B-VM has onboard video but only a vga output. DVI looks a lot nicer with the EIZO 24". That'...
- Sat Sep 30, 2006 2:19 am
- Forum: System Advice / Troubleshooting
- Topic: HTPC C2D in NSK1300... frustrated!
- Replies: 5
- Views: 4989
HTPC C2D in NSK1300... frustrated!
I just finished putting together a new HTPC for our kitchen. But I'm not happy at all. Well at first the components: Asus P5B-VM Intel Core 2 Duo E6300, stock cooler Kingston 1GB Value Ram Gigabyte Geforce 7300 GS Seagate Barracuda 7200.9 160GB 8MB SATA II low noise (ST3160811AS) TechniSat SkyStar 2...
- Wed Aug 30, 2006 3:03 am
- Forum: Fans and Control
- Topic: Additional temperature sensors for MBM and Speedfan
- Replies: 30
- Views: 29789
I ended up using Molex kk .1' headers and plugs, Got them and all the other components bar the maxim chip and the pcb from Farnell. The challenge was finding the pins that matched the molex sockets. This was really tough, I stumbled on the right ones eventually. There are a bewildering array of mol...
- Wed Aug 30, 2006 2:30 am
- Forum: Fans and Control
- Topic: Additional temperature sensors for MBM and Speedfan
- Replies: 30
- Views: 29789
It is a basic question, but could you give me the specs of the connectors you used? I have sourced all the other stuff I need for a temp guage like yours (though based on an LM84 IC) But searching catalogues for connectors is hard.. too many choices, and most of them look the same :? They look like...
- Wed Aug 30, 2006 1:53 am
- Forum: Fans and Control
- Topic: Additional temperature sensors for MBM and Speedfan
- Replies: 30
- Views: 29789
I'm sorry that I haven't been too active lately, but I had a lot of work to do in university. Exams and stuff, but I have some free time now. I didn't know that there so many question here. =) Leem wrote me a PM but I thought that was the only question. I will try to answer all your other question l...
- Mon Sep 26, 2005 12:05 pm
- Forum: Cases and Damping
- Topic: Homemade TNN-500A
- Replies: 8
- Views: 5616
Well there is someone at our german forum www.silenthardware.de/forum who sells heatpipes. Not only straight heatpipes also bended the way you want it. But I don't know if he ships to the US. Here is a list of heatpipes he offers: http://home.arcor.de/webfire84/PreislisteHP.pdf Here is his emailaddr...
- Mon Jul 25, 2005 2:25 am
- Forum: SPCR Article Discussion
- Topic: Seasonic S12-430: Beyond the Super Tornado
- Replies: 200
- Views: 236421
The S12 330 and 380 is now avaible in germany: http://www.winner-computer.de/47248f6127fcae1dd2b9a47d43aa4c9d.php?art_kategorie=71 I don't have any experience with this shop and I also don't know about international shipping. When someone is interested, I can write them an email, if you don't speak ...
- Thu Jul 21, 2005 9:25 am
- Forum: Watercooling
- Topic: Maybe Tt isn't so bad...
- Replies: 7
- Views: 5713
If you like a big radiator you should check out this one: http://www.caseking.de/shop/catalog/product_info.php?cPath=27_282_667&products_id=2879 Don't know if it's avaiable in the USA but it's very popular in Germany. It performs very well, especially passive. When it's not enough you can mount 9 12...
- Wed Jun 22, 2005 2:04 am
- Forum: Fans and Control
- Topic: Silent Fans in Australia?
- Replies: 55
- Views: 26570
What about ordering Yate Loon D12SL-12s @tekgems. They ship with USPS International Global Express Mail, it's not too expensive (At least for many fans). You also get a tracking number and email updates about your shipping status. Ordered there twice, first time 55 fans second time 70 fans. No probl...
- Mon Jun 13, 2005 1:16 pm
- Forum: Video Cards & Monitors
- Topic: Which passive Gigabyte: 6600GT or 6800
- Replies: 22
- Views: 11051
I think you made the right choice. Lots of people at silenthardware.de have the 6800 and they are all very satisfied. From what I've heard most of the time it's possible to unlock all pipes, at least with the agp version. But I don't know if that has changed. I don't know if you can read german but ...
- Thu Jun 09, 2005 9:10 am
- Forum: Power Supplies
- Topic: new FSP Green Power with 85% efficiency
- Replies: 88
- Views: 62146
The Greenpower is now avaiable in Germany at ichbinleise.de. At least the 400 watt version
http://www.ichbinleise.de/product_info. ... 1a7c03eee0
It's pre modded with a different fan.
http://www.ichbinleise.de/product_info. ... 1a7c03eee0
It's pre modded with a different fan.
- Mon Jun 06, 2005 7:57 am
- Forum: Video Cards & Monitors
- Topic: Does anyone own ThermalTake Schooner ??
- Replies: 18
- Views: 9808
Actually I think it's a very intelligent design, at least when you use a back case fan. The case fan is blowing right through the horizontal fins of the Scythe cooler. So you should have a nice cooling. I think Scythe already presented it on the Cebit, but I'm not sure. And from I've heard it's only...
- Wed Jun 01, 2005 10:22 am
- Forum: CPUs and Motherboards
- Topic: AMD XP Mobile - Resellers in sweden/europe?
- Replies: 5
- Views: 4705
Have a look at this list:
http://www.geizhals.at/eu/a87012.html
AMD XP-M 2500+
or
http://www.geizhals.at/eu/a95190.html
AMD XP-M 2600+
I'm not sure if all these sellers ship in europe. You have to check that.
http://www.geizhals.at/eu/a87012.html
AMD XP-M 2500+
or
http://www.geizhals.at/eu/a95190.html
AMD XP-M 2600+
I'm not sure if all these sellers ship in europe. You have to check that.
- Wed Jun 01, 2005 5:36 am
- Forum: CPU Cooling
- Topic: Zalman's new 9500 LED CPU cooler @ Computex Taipei
- Replies: 47
- Views: 24725
Here are more informations.
I don't understand what is written there but there are more pictures and a few specs.
I don't understand what is written there but there are more pictures and a few specs.