Search found 76 matches

by calam63
Sat Jun 18, 2005 9:26 pm
Forum: Silent Storage
Topic: WD 74G Raptor - Is it safe to enclose it in Smart Drive?
Replies: 1
Views: 1009

WD 74G Raptor - Is it safe to enclose it in Smart Drive?

I am about to get a Raptor after reading the new tests, I was wondering if it woudl be safe to enclose it in my 2002c? How do I also check Hard Drive temps? Thanks
by calam63
Fri Mar 18, 2005 5:36 pm
Forum: CPU Cooling
Topic: skt 754 using a thermalrigtht 900 going to xp90
Replies: 0
Views: 669

skt 754 using a thermalrigtht 900 going to xp90

i was wondering if anyone could tell me if i will run into problems - because i used a thermalright backplate from the 900 but the xp90 uses a different retention bracket? thanks
by calam63
Tue Oct 05, 2004 12:20 pm
Forum: Video Cards & Monitors
Topic: Does a fanless Sapphire 9600 fit in a Shuttle?
Replies: 1
Views: 1156

i think it does- my friend has a shuttle and he wanted to put the 9600xt ultimate into his case
by calam63
Tue Jul 20, 2004 2:56 pm
Forum: Watercooling
Topic: Zalman resirator flow thingy called back
Replies: 7
Views: 3348

http://www.zalman.co.kr/magic/mboard/mb ... er_da=desc

this is actually from zalman themself
by calam63
Thu Jul 15, 2004 9:56 pm
Forum: Video Cards & Monitors
Topic: just installed zm80d on my ti4200 - hot!
Replies: 6
Views: 2436

just installed zm80d on my ti4200 - hot!

I was wondering if it was suppose to be this hot? I am just wondering otherwise I am going to get the fan with it too. I must say I am very pleased with how quiet my computer is running now :)
by calam63
Tue Jul 13, 2004 10:02 pm
Forum: Silent Storage
Topic: how do i make sure?
Replies: 10
Views: 2566

mine is a jvc - and nice and silent :)
by calam63
Tue Jul 13, 2004 7:05 pm
Forum: SPCR's Folding@Home
Topic: Folding and heat...
Replies: 20
Views: 7520

prime95 there http://www.mersenne.org/freesoft.htm - its a computer stress tester - if you can't run it for many hours free of errors- means something is going on with your hardware chipset drivers - pending on what board and chipset you have - you can find them at alot of places - my asus board has...
by calam63
Tue Jul 13, 2004 6:11 pm
Forum: SPCR's Folding@Home
Topic: Folding and heat...
Replies: 20
Views: 7520

my athlon 64 overclocked and fans undervolted runs at full load at about 50c and that is with a room at about 80-85 F

the unstableness i bet is either not updated chipset drivers - or something wrong with the setup - how do you do with prime95 or memtest86?
by calam63
Tue Jul 13, 2004 5:25 pm
Forum: Fans and Control
Topic: Japanaflo?
Replies: 6
Views: 2121

just wait till you undervolt them - its like they aren't even there :)
by calam63
Tue Jul 13, 2004 5:24 pm
Forum: Fans and Control
Topic: A question for Athlon 64 mobo owners: heat generation?
Replies: 6
Views: 2034

can you get another board?
by calam63
Mon Jul 12, 2004 8:08 pm
Forum: SPCR's Folding@Home
Topic: Folding and heat...
Replies: 20
Views: 7520

if your computer is crashing - the problem may not stem from heat - it may be a memory problem - have you tried running memtest86 or prime95?
by calam63
Mon Jul 12, 2004 5:57 pm
Forum: Cases and Damping
Topic: Blasphemy... 7 fans?
Replies: 13
Views: 4043

wait why are you running dual xeons? have you thought about the opteron?
by calam63
Mon Jul 12, 2004 12:30 am
Forum: General Gallery
Topic: w00t athlon 64 in a quiet 4252 :)
Replies: 0
Views: 2430

w00t athlon 64 in a quiet 4252 :)

so this is my first attempt on building a quiet computer - i've had great help from this website and forums - i will update with more pictures as my computer gets more organized http://img28.exs.cx/img28/8411/inside1.jpg that is the inside of my 4252 - all of my system specs are in my signature - i ...
by calam63
Sun Jul 11, 2004 11:44 pm
Forum: SPCR's Folding@Home
Topic: is eoc down?
Replies: 4
Views: 3921

is eoc down?

can't seem to get to the website to check my stats
by calam63
Sun Jul 11, 2004 1:41 am
Forum: Fans and Control
Topic: Japanaflo?
Replies: 6
Views: 2121

japanflos are panaflos made from japan - there was a debate that was settled about panaflos made in japan and china, where the ones made in japan are better
by calam63
Sat Jul 10, 2004 7:25 pm
Forum: Power Supplies
Topic: how can i remove the 20 pin atx connector?
Replies: 8
Views: 2749

yup - i think the best way is sleeves - but thx for the other suggestions - might as well go all the way - purchased a remover today :)

anyone know if i should cut the leads that i am not using?
by calam63
Sat Jul 10, 2004 2:31 pm
Forum: Power Supplies
Topic: how can i remove the 20 pin atx connector?
Replies: 8
Views: 2749

there is one at jab-tech for 12.95
by calam63
Fri Jul 09, 2004 8:24 pm
Forum: Power Supplies
Topic: how can i remove the 20 pin atx connector?
Replies: 8
Views: 2749

how can i remove the 20 pin atx connector?

I am trying to sleeve my cables and i thought my molex remover would be able to do it - but it can't - i found an atx 20 pin remover from svc - but i don't want to shell out another 25 dollars? is there another alternative or maybe a site for something that is 10 dollars? thanks all
by calam63
Thu Jul 08, 2004 3:08 pm
Forum: Power Supplies
Topic: just got a ss 300 super tornado- anyone want pics? or have q
Replies: 1
Views: 1303

just got a ss 300 super tornado- anyone want pics? or have q

I was wondering if anyone wanted pics? or had questions. I just picked up a seasonic super tornado 300w from siliconacoustics. it does have the sata ready tag on the box - and i think its a rev a3. haven't put it into my box yet - waiting for my sleeving kit :)
by calam63
Thu Jul 08, 2004 2:59 pm
Forum: Power Supplies
Topic: just got a seasonic super tornado 300w - anyone want pics or
Replies: 0
Views: 927

just got a seasonic super tornado 300w - anyone want pics or

so i just got a seasonic tornado 300w at siliconacoustics - was wondering if anyone wanted pictures or had any questions - i haven't put it into my system yet - waiting for my sleeve kit to get here - but i can post pictures if anyone is interested. it does have the sata ready tag on the outside -
by calam63
Tue Jul 06, 2004 10:26 pm
Forum: Power Supplies
Topic: What PSUs 'mod' well? Or better yet: What are indications?
Replies: 6
Views: 2006

i think mike is selling his own batch of modded seasonics
by calam63
Sun Jul 04, 2004 1:47 pm
Forum: Cases and Damping
Topic: evercase 4252 - cutting out the exhaust grill help?
Replies: 4
Views: 2739

hehe - i've read that i - i will use a nibbler - was wondering if any current 4252 owners have some pics of what the final pic might look like?
by calam63
Sun Jul 04, 2004 1:36 pm
Forum: Cases and Damping
Topic: evercase 4252 - cutting out the exhaust grill help?
Replies: 4
Views: 2739

evercase 4252 - cutting out the exhaust grill help?

i am thinking of cutting out the grill - but not sure how i want to - or which fan i want to use - at the moment i have a 120mm fan coming in the mail - i have 80 92 and 120 fans available - i thinking they will all be quiet at 5volts though - so was just wondering how you would cut grill http://ima...
by calam63
Thu Jul 01, 2004 6:00 pm
Forum: CPU Cooling
Topic: how hot can a athlon 64 run? (undervolting fan to 5volts)
Replies: 4
Views: 1438

cool thanks for all the help - these are great forums - hehe my wires are a mess at the moment - and hopefully i will be able to make those nice and neat later too -

rmaing my ram and such - didn't help - running my computer with one stick of 256 pc 2700 lol - can't wait to get all the kinks out
by calam63
Thu Jul 01, 2004 5:45 pm
Forum: CPU Cooling
Topic: how hot can a athlon 64 run? (undervolting fan to 5volts)
Replies: 4
Views: 1438

hmm ambient temperature - i don't know lol no thermometer - but it has to be like 80f the hs i am using is a slk-948u - switched my 92mm fan (5v) to my cpu and its now at 50c/120f so i think i am going to go with that - just ordered a 120mm fan (ralf's p4c rig) and going to see what that is like :) ...
by calam63
Thu Jul 01, 2004 12:33 pm
Forum: CPU Cooling
Topic: how hot can a athlon 64 run? (undervolting fan to 5volts)
Replies: 4
Views: 1438

how hot can a athlon 64 run? (undervolting fan to 5volts)

So I finally got a athlon 64 3200+ and I am loving it after a coupld of problems that I recently have. But i undervolted to 1.375V and am currently using a 5v JMC Panther fan I think. The current temperature I am reading is 54c from cpu and 39c from mobo 5v 80mm JMC Panther on cpu 5v 92mm Panaflo M1...
by calam63
Sun Jun 27, 2004 10:25 pm
Forum: CPU Cooling
Topic: how to apply arctic silver 5 to athlon 64 cpu?
Replies: 2
Views: 1371

how to apply arctic silver 5 to athlon 64 cpu?

I was wondering how to do this - i will be building my first computer and don't want to screw up - i've heard of people applying some between the heat spreader and cpu AND the spread and hsf - would it be beneficial to take the heat spreader off? or what is the best way - my cpu/mobo comes tomorrow :)
by calam63
Fri Jun 25, 2004 2:47 pm
Forum: SPCR's Folding@Home
Topic: what system(s) are people running for 5000+ pts a week?
Replies: 13
Views: 4938

wow lol - i don't think i will ever catch up to you guys unless i install it in a lab of computers hehe :) nice work all
by calam63
Thu Jun 24, 2004 9:53 pm
Forum: SPCR's Folding@Home
Topic: what system(s) are people running for 5000+ pts a week?
Replies: 13
Views: 4938

what system(s) are people running for 5000+ pts a week?

i don't thinki can even comprehend how you guys are getting over thousands of points each week - when i barely make 100 a day - are you guys runngin several computers? or is my 1.5 ghz just that slow?
by calam63
Tue Jun 22, 2004 9:41 pm
Forum: Cases and Damping
Topic: Case Decision
Replies: 4
Views: 2130

have you looked into evercase 4252?