XP under 1.1V?

The forum for non-component-related silent pc discussions.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
kamosoft
Posts: 17
Joined: Sun Jun 15, 2003 1:07 am

XP under 1.1V?

Post by kamosoft » Sun Jun 15, 2003 1:17 am

Hi :)
I have XP 1700+ running at 1500/1.1V with Soltek 75frn2-l , is there some kind of mod to go under 1.1V? I guess some bios crack if the motherboard can allow lower voltage ...

pingu666
Friend of SPCR
Posts: 739
Joined: Sun Aug 11, 2002 3:26 pm
Location: swindon- england :/
Contact:

Post by pingu666 » Sun Jun 15, 2003 4:36 am

search on google for volt mod Soltek 75frn2-l and www.amdmb.com
i think itll be a hardware work around, u wont go much lower than 1.1 tho i think

Gandalf
Posts: 331
Joined: Tue Dec 24, 2002 9:04 am
Location: Belgium

Post by Gandalf » Sun Jun 15, 2003 6:35 am

wtf? how did you get it that low :s.

Zhentar
Patron of SPCR
Posts: 918
Joined: Thu Mar 27, 2003 4:00 pm
Location: Madison, WI, USA

Post by Zhentar » Sun Jun 15, 2003 8:51 am

you'd probably have to find an overvolting mod to find out what resistor it is, unsolder the resistor, and put in a higher resistance one in its place....

kamosoft
Posts: 17
Joined: Sun Jun 15, 2003 1:07 am

Post by kamosoft » Sun Jun 15, 2003 10:42 pm

I'm searching the web righ now, if I find something easy to do I'll post it here. Thank you for your suggestions.
About why XP 1700+ can run at 1500Mhz at 1.1V (overclocked and undervolted :)) ask AMD :).
Not every XP 1700+ can do that although, mine is 11-th week 03 DLT3C

pingu666
Friend of SPCR
Posts: 739
Joined: Sun Aug 11, 2002 3:26 pm
Location: swindon- england :/
Contact:

Post by pingu666 » Mon Jun 16, 2003 12:59 am

dunno if mine can
does 2.3ghz tho :D so i run at 2.3 ;)

frosty
Posts: 636
Joined: Fri Jun 06, 2003 9:40 am
Location: USA

Post by frosty » Mon Jun 16, 2003 11:11 am

I got mine to only go to 1.5 vcore but it did make the psu more quiet if possible or just my mind and the temp went down ave 3c.

Kostik
*Lifetime Patron*
Posts: 391
Joined: Wed Apr 16, 2003 7:51 am
Location: Paris, France

Post by Kostik » Mon Jun 16, 2003 1:19 pm

This might be useful.

Or not :)

kamina
Posts: 147
Joined: Mon Jun 02, 2003 4:14 am
Location: Finland
Contact:

Post by kamina » Tue Jun 17, 2003 12:04 pm

Got mine to 1.06v with a motherboard that undervolts :D

http://www.slashglam.com/low_voltage.jpg


Image

Post Reply