Baking fixed my GFX card :D
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
Baking fixed my GFX card :D
I had been reading about this method for some time but was a little skeptical.
Then I had the unfortunate thing that one of my GFX cards stopped working .
After a few day's of trying everything else I decided what the hell, it's dead anyway so might as well try it out.
Unfortunately I forgot to take pictures.
Following the instructions I've seen here and there I removed anything unnecessary from the card. Pre-heated my oven to 200C°, made some aluminium foil balls to balance the card on the tray (with the gpu unit face down) and baked it for 10 minutes.
And prista! it bloody worked!
I'm a happy little camper now .
edit: Also read that this should work for CPU and RAM sticks as well. If it's dead/faulty and can't be RMAed try at your discretion
Then I had the unfortunate thing that one of my GFX cards stopped working .
After a few day's of trying everything else I decided what the hell, it's dead anyway so might as well try it out.
Unfortunately I forgot to take pictures.
Following the instructions I've seen here and there I removed anything unnecessary from the card. Pre-heated my oven to 200C°, made some aluminium foil balls to balance the card on the tray (with the gpu unit face down) and baked it for 10 minutes.
And prista! it bloody worked!
I'm a happy little camper now .
edit: Also read that this should work for CPU and RAM sticks as well. If it's dead/faulty and can't be RMAed try at your discretion
-
- Posts: 1839
- Joined: Mon Feb 05, 2007 2:10 pm
- Location: Northern New Jersey
- Contact:
-
- Friend of SPCR
- Posts: 279
- Joined: Sun May 06, 2007 10:37 am
-
- Posts: 1608
- Joined: Tue Jan 04, 2005 4:02 pm
- Location: United States
It's legit. I guess sometimes the BGA solder joints on graphics cards and other components fail (maybe due to flexing of the PCB and stuff like that, I'm not completely sure why). Baking them heats up the solder and allows it to reflow, fixing the joints.
I mean obviously it won't work every time, depends on why the card failed. If it's not related to the solder joints, this won't help. But if you have a dead, out of warranty card lying around and would just be throwing it away anyway, it's not like it could hurt to try.
I mean obviously it won't work every time, depends on why the card failed. If it's not related to the solder joints, this won't help. But if you have a dead, out of warranty card lying around and would just be throwing it away anyway, it's not like it could hurt to try.
learned about it on http://forums.extremeoverclocking.com/ first
then you can see it on youtube as well
http://www.youtube.com/results?search_q ... +card&aq=0
Was skeptical at first as well but as frostedflakes said this is about fixing micro fissures in the soldering.
then you can see it on youtube as well
http://www.youtube.com/results?search_q ... +card&aq=0
Was skeptical at first as well but as frostedflakes said this is about fixing micro fissures in the soldering.
-
- Posts: 46
- Joined: Mon May 17, 2010 11:45 am
- Location: Scotland
Do you think this method would be likely to work with larger gaps in the solder?
I managed to stab my nvidia card with a small screwdriver when trying to take the cooler apart, resulting in a scrape through 6 tracks. 2 tracks are broken completely...
I might be clutching at straws a bit but does an oven at 200° melt the solder enough that it could join back together?
I managed to stab my nvidia card with a small screwdriver when trying to take the cooler apart, resulting in a scrape through 6 tracks. 2 tracks are broken completely...
I might be clutching at straws a bit but does an oven at 200° melt the solder enough that it could join back together?
-
- SPCR Reviewer
- Posts: 1115
- Joined: Fri Mar 04, 2005 9:07 pm
- Location: Vancouver
-
- Posts: 1608
- Joined: Tue Jan 04, 2005 4:02 pm
- Location: United States
The traces are not solder and won't melt at any reasonable temperature. To fix that you'll have to actually add some solder. Best way I can think of is to scrape the lacquer off the traces near the cut and then just bridge them with solder. If they're very small, though, you'll have to do this without bridging adjacent traces, which could be difficult.Just an ordinary rabbit wrote:Do you think this method would be likely to work with larger gaps in the solder?
I managed to stab my nvidia card with a small screwdriver when trying to take the cooler apart, resulting in a scrape through 6 tracks. 2 tracks are broken completely...
I might be clutching at straws a bit but does an oven at 200° melt the solder enough that it could join back together?
I'd like to second what frostedflakes said and also add that silver paint might work better than solder. Or a conductive pen. You can buy that from any good electronic component shop.Just an ordinary rabbit wrote:Do you think this method would be likely to work with larger gaps in the solder?
I managed to stab my nvidia card with a small screwdriver when trying to take the cooler apart, resulting in a scrape through 6 tracks. 2 tracks are broken completely...
I might be clutching at straws a bit but does an oven at 200° melt the solder enough that it could join back together?
-
- Posts: 266
- Joined: Wed Mar 31, 2010 8:19 am
- Location: OV, The Netherlands
Partly true. With the heat your warming up the epoxy PCB. That PCB then gets a little bigger (just like cooked water takes up more space than cold water). When the PCB gets cooled (by that the pcb gets a little smaller) traces are making better contact again.Just an ordinary rabbit wrote:Do you think this method would be likely to work with larger gaps in the solder?
I managed to stab my nvidia card with a small screwdriver when trying to take the cooler apart, resulting in a scrape through 6 tracks. 2 tracks are broken completely...
I might be clutching at straws a bit but does an oven at 200° melt the solder enough that it could join back together?
-
- Posts: 1839
- Joined: Mon Feb 05, 2007 2:10 pm
- Location: Northern New Jersey
- Contact:
Alright, I had a frankenstein experience last night. I took my half dead, artifacting ATI 4850, took everything off it, pre-heated the oven to about 385 (oven doesn't have an exact 385, so I just had to go with whatever seemed to be close enough) and then I tossed the card in for exactly 8 minutes. Towards the end of the 8 minutes, after around 6 minutes, I started to crack the oven door, to accelerate the cool down period, and as soon as the card was cool enough to handle, I got the cooler back onto it.
Tossed the zombie into my computer, hit the power button, lo and behold, it's not fake. Computer started, no artifacts, no capacitors were bulging after coming out of the oven, and it fricken worked!
Granted I didn't do anything intense with it yet because I want to get an Accelero S1 and VRM cooling for it before I use it for good, but before the process, it had some nasty artifacting, and caused Windows 7 to BSOD constantly.
The funniest part about this is that it was out of a customers computer, and I took it home because it's not a reliable fix that could have been given to the customer, and there is lots of talk about the fix not always working after 5 weeks or so.
Lots of reading also led me to using Flux while performing this process, as it will basically make the fix near permanent, or until the flux dries out again (which is a pretty long time unless you're notorious for killing cards).
I'm going to be watching this 4850 closely, but I get to add it to my list of zombie/free parts that are in my computer.
Oh, and did I mention it's faster than my 9600GT?
Tossed the zombie into my computer, hit the power button, lo and behold, it's not fake. Computer started, no artifacts, no capacitors were bulging after coming out of the oven, and it fricken worked!
Granted I didn't do anything intense with it yet because I want to get an Accelero S1 and VRM cooling for it before I use it for good, but before the process, it had some nasty artifacting, and caused Windows 7 to BSOD constantly.
The funniest part about this is that it was out of a customers computer, and I took it home because it's not a reliable fix that could have been given to the customer, and there is lots of talk about the fix not always working after 5 weeks or so.
Lots of reading also led me to using Flux while performing this process, as it will basically make the fix near permanent, or until the flux dries out again (which is a pretty long time unless you're notorious for killing cards).
I'm going to be watching this 4850 closely, but I get to add it to my list of zombie/free parts that are in my computer.
Oh, and did I mention it's faster than my 9600GT?
-
- Posts: 266
- Joined: Wed Mar 31, 2010 8:19 am
- Location: OV, The Netherlands
-
- Posts: 1839
- Joined: Mon Feb 05, 2007 2:10 pm
- Location: Northern New Jersey
- Contact:
I successfully swapped my Accelero S1 onto the 4850, and temps are much lower. A little warmer than my 9600GT, but that was expected given the extra power. I had to get creative with the VRM cooling, but it appears to be working fine. No BSOD or problems installing the CCC/driver. Next up is playing American McGee's Alice, or maybe borrowing Oblivion from a friend.
I'm not in front of the same computer, but core temps are in the high 30's C, VRMs were in the mid 50's, and RAM was in the low 50's. I do have a 92mm 7v fan strapped onto the Accelero for safety as well.
Pretty good for a "dead" card.
I'm not in front of the same computer, but core temps are in the high 30's C, VRMs were in the mid 50's, and RAM was in the low 50's. I do have a 92mm 7v fan strapped onto the Accelero for safety as well.
Pretty good for a "dead" card.