What size is the front fan size of the Evercase 4252?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar
-
- Posts: 54
- Joined: Sun Feb 13, 2005 5:09 pm
- Location: Vancouver
- Contact:
What size is the front fan size of the Evercase 4252?
Assuming no drilling or modding, what is the maximum size of the front fan of the Evercase 4252? Does a 92mm fit?
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact:
Hello:
Well, the front will take an 80mm w/o mods, (and the rear will take 80 or 92 or 120mm). The front will take a 92mm (and probably a 120mm) w/o mods if you mount the fan with the two bolts on opposite corners. The top HD's will probably touch the back of the fan, so it's up to you how you might handle it. You can possibly push the grill forward a bit to get some clearance -- but it is also quite possible that you either don't need any fan in the front, or just use a very quiet 80mm.
Well, the front will take an 80mm w/o mods, (and the rear will take 80 or 92 or 120mm). The front will take a 92mm (and probably a 120mm) w/o mods if you mount the fan with the two bolts on opposite corners. The top HD's will probably touch the back of the fan, so it's up to you how you might handle it. You can possibly push the grill forward a bit to get some clearance -- but it is also quite possible that you either don't need any fan in the front, or just use a very quiet 80mm.