Heya,
Does anyone have a Gigabyte card that supposedly allows you to set the voltage? There is confusion on the net.
In my case, using the latest version of GamerHud, I can select a voltage but when applying it defaults back to 0.9V. With the GamerHud version that was supplied with the 3d card, the voltages will stick.. but..
Running 1 or 1.4 volt, there is no difference in temperature yet you'd expect almost 200% power consumption by the chip with this voltage bump.
I've read online that more people have the voltage setting to default after clicking 'apply' using a new version of the utility.
I have however not read about it *actually* changing the voltage, i.e. claims backed up by real power draw measurments or in my case a change in Furmark temperature.
I'm running a 9600GT ' silent pipe' nx96t512hp..
Who has actually measured a power / temp increase when increasing the voltage in GamerHud? Sofar for me it is GamerBull..
cheers
Niels
Gigabyte GamerHud ; does it really work? (voltage adjust)
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
HUD works just fine for me on my 9800GT card. I run my card undervolted (at the minimum 1.05V) and slightly overclocked.
Bear in mind (as mentioned in the help page) you have to disable the auto 2D/3D setting for manual voltage/clock to work. You may also have to reboot once or twice for things to settle down.
Bear in mind (as mentioned in the help page) you have to disable the auto 2D/3D setting for manual voltage/clock to work. You may also have to reboot once or twice for things to settle down.