anyone using HR-03 Plus/8800GTS with P5K-Deluxe?

They make noise, too.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
aztec
Posts: 443
Joined: Mon Dec 12, 2005 5:01 am
Location: Foster City, CA

anyone using HR-03 Plus/8800GTS with P5K-Deluxe?

Post by aztec » Mon Jul 16, 2007 4:01 pm

After converting all my 92mm fans to Nexus.....the noisiest thing inside my case is now the 8800 GTS.

and its getting more and more annoying. :(

Is anyone using an HR-03 Plus with this motherboard?

My problem is I have a sound card on the bottom most slot and it looks like it will be a tight fit, especially since I intend on mounting a 92mm fan on the HR-03.

Thanks for any help.

Here's a picture of the baord. You can see, that if the HR-03 PLus already takes 2 slots, mounting the fan will take another slot and be very, very close to the last PCI slot.

http://usa.asus.com/999/images/products/1646/1646_l.jpg

elpibe10
Posts: 114
Joined: Fri Apr 06, 2007 3:57 pm
Location: Out of this world !

Post by elpibe10 » Mon Jul 16, 2007 5:12 pm

Not recommended as the HR-03 Plus' fan will be touching the back of your sound card and that may block off the air intake of the fan.

derekchinese
Posts: 255
Joined: Fri Mar 02, 2007 6:57 pm
Location: Nowhere.

Post by derekchinese » Mon Jul 16, 2007 5:29 pm

You can't wrap the hr-03 above the 8800GTS? If you do, it would probably only take one slot above and provide room for your fan as well.

wardp
Posts: 6
Joined: Tue Jul 10, 2007 10:38 am
Location: Gothenborg, Sweden

Post by wardp » Thu Aug 09, 2007 1:56 am

Here's howI did my hr-03 and 8800GTS - and I too am looking for to add a fan for the HR-03. . Aztec - did you finally add a fan and if so - how'd it go? and if possble a pic? I have the same issue with additional cards . .

mentawl
Posts: 285
Joined: Sat Feb 18, 2006 10:29 pm
Location: Glasgow, UK

Post by mentawl » Thu Aug 09, 2007 5:24 am

Yeah, looking at the picture of the board, you have tons of space *above* the PCI-E slot, assuming you don't need either of the PCI-E x1 slots. Mount the HR-03+ wraparound style, and get a quiet 92mm for the top of it =)

Post Reply