So I decided to go with the Silverstone SST-TJ03 Case for my watercooling system. I have one more questions though. Is it worth the extra money to get dual radiators. The one I know i am going to have is the Danger Den Black Ice MicroII (Dual 80mm) radiator but I also have plans to dremel the top 80mm blow hole to a 120mm hole and add a Danger Den Black Ice 120mm Xtreme. What kind of performance differences would I notice. Here is a list of the components I will be putting in my system.
CPU Block: Danger Den 1/2in RBX
GPU Block: Danger Den 1/2in Maze 4 Grahics Block
NB Block: Danger Den 1/2 Maze 4 Chipset Block
Pump: Swiftech MCP 600
Reservoir: Dual 3 1/2 Bay Reservoir
Radiator: Danger Den Black Ice MicroII (Dual 80mm) maybe a Danger Den Black Ice 120mm Xtreme too
1/2in Tygon Tubing
Water Additive: Zerex Racing Super Coolant From Danger Den
Dual Radiators
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 135
- Joined: Tue Jun 01, 2004 10:09 am
- Location: Fort Worth, Texas
looking good there, TheDarkHacker.
off-topic question: have you considered the tdx as a cpu block? i know it looks like a toilet seat but apparently it performs very well
adding another radiator should be fine. you have more than enough pumping power in that mcp600 so you shouldn't have any problems. it'll make routing the tubing a little more of a job though cos it'll obviously require you to have tubing going up to the top and back down.
just remember to take pics and post them here
off-topic question: have you considered the tdx as a cpu block? i know it looks like a toilet seat but apparently it performs very well
adding another radiator should be fine. you have more than enough pumping power in that mcp600 so you shouldn't have any problems. it'll make routing the tubing a little more of a job though cos it'll obviously require you to have tubing going up to the top and back down.
just remember to take pics and post them here