Where are the LM99 chip temp sensors on speedfan monitoring?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
Where are the LM99 chip temp sensors on speedfan monitoring?
I have the Abit AN8 Sli, and speedfan show 6 temp sensors
1. cpu
2. pwm
3. HD
4. sys
5. LM99
6. LM99
what are these LM99 sensors monitoring???? the "BUS" info is "12CNVidia SMBus"
1. cpu
2. pwm
3. HD
4. sys
5. LM99
6. LM99
what are these LM99 sensors monitoring???? the "BUS" info is "12CNVidia SMBus"
I also have 6 temps, and I know that there's no GPU temps in my SpeedFan with my graphics card, I used a PCI graphics card to test. Do the same if you have one.
1 - CPU or PWM, still don't know,ISA
2 - ITE8712 chip, you can call it case temp,ISA
3 - nF3 temp,ISA
4 - useless temp,ISA
5 - useless temp,SMBus
6 - CPU temp,SMBus
It's easier to help you if you tell us the chip and bus for each temp.
1 - CPU or PWM, still don't know,ISA
2 - ITE8712 chip, you can call it case temp,ISA
3 - nF3 temp,ISA
4 - useless temp,ISA
5 - useless temp,SMBus
6 - CPU temp,SMBus
It's easier to help you if you tell us the chip and bus for each temp.
Perhaps it is your video card, and you just need to adjust Speefan's value to nVidia's. That's what I had to do for my 6800.
Yup, after checking, LM99 is my 6800. My LM99 Temperature 1 offset is 0 and Temperature 2 is 9 (under "advanced" then select the chip). You might have to offset yours to a different difference. BTW, for me at least, Temperature 1 is the card's ambient while Temperature 2 is the core.
Yup, after checking, LM99 is my 6800. My LM99 Temperature 1 offset is 0 and Temperature 2 is 9 (under "advanced" then select the chip). You might have to offset yours to a different difference. BTW, for me at least, Temperature 1 is the card's ambient while Temperature 2 is the core.