connecting fans to MoBo
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
connecting fans to MoBo
hey everyone,
i'm about to get a Noctua 1200 [$25] (to be used as a front fan- in front of the hdd)
I also have 2 scyth fans:
1. the fan that that came with my Ninja - connected to the mobo with "fanmate 2".
2. s-flex 1200 [$19] as rear case fan - connected to a molex.
my question -
can i connect all 3 fans to my mobo? (that appears in my sig).
as i read to noctua comes with 2 connectors ULNA an LNA (so they call it) can i connect my fans using these to my mobo?
thanks'
Dan.
i'm about to get a Noctua 1200 [$25] (to be used as a front fan- in front of the hdd)
I also have 2 scyth fans:
1. the fan that that came with my Ninja - connected to the mobo with "fanmate 2".
2. s-flex 1200 [$19] as rear case fan - connected to a molex.
my question -
can i connect all 3 fans to my mobo? (that appears in my sig).
as i read to noctua comes with 2 connectors ULNA an LNA (so they call it) can i connect my fans using these to my mobo?
thanks'
Dan.
thanks!
i want to connect them to the mobo so i can have a read on them.
i want to connect the u\lna to the mobo.
will it show it's speed in the bios (5v\7v).
edit: 8 will be putting the noctua as a front fan in front of my hdd, and behind a tight net - to hold out dust.
will it's pressure be enough at 7v?
i want to connect them to the mobo so i can have a read on them.
i want to connect the u\lna to the mobo.
will it show it's speed in the bios (5v\7v).
edit: 8 will be putting the noctua as a front fan in front of my hdd, and behind a tight net - to hold out dust.
will it's pressure be enough at 7v?
so i got the noctua.
now my mobo doesn't work in the sys_fan header, it just start spinning the fan backwards and forwards like a centimeter.
what can the problem be?
beside that connecting a scythe s-flex 1200 to the ULNA (5v) cable to the cpu_fan made the fan not start exactly when the computer starts - is that normal?
can someone help?
thanks a lot,
Dan.
now my mobo doesn't work in the sys_fan header, it just start spinning the fan backwards and forwards like a centimeter.
what can the problem be?
beside that connecting a scythe s-flex 1200 to the ULNA (5v) cable to the cpu_fan made the fan not start exactly when the computer starts - is that normal?
can someone help?
thanks a lot,
Dan.
update:
connected the rear fan to the sys_fan.
apparently, the sys_fan gives out ~5v! so if i put a LNA it doesn't work (it lowers the v. to much).
so i connected the s-flex 1200 directly to it and it spins at ~700rpm.
I connected the forward noctua 1200 fan with the LNA so it spins at 900-1000rpm to the CPU_fan at header.
and the scythe 1200 that came with the ninja to the pwr_fan with fanmate2.
btw - what fan comes with the ninja?
it isn't connected to the bios so far as i seen.
it's too soon to tell but i think i prefer the scythe over the noctua - it remains to be seen.
connected the rear fan to the sys_fan.
apparently, the sys_fan gives out ~5v! so if i put a LNA it doesn't work (it lowers the v. to much).
so i connected the s-flex 1200 directly to it and it spins at ~700rpm.
I connected the forward noctua 1200 fan with the LNA so it spins at 900-1000rpm to the CPU_fan at header.
and the scythe 1200 that came with the ninja to the pwr_fan with fanmate2.
btw - what fan comes with the ninja?
it isn't connected to the bios so far as i seen.
it's too soon to tell but i think i prefer the scythe over the noctua - it remains to be seen.