i know there is another topic on this somewhere, but after 30 minutes of not finding it, my frustration has taken over.
I am trying to undervolt a conroe Celeron Dual core on an intel DG41MJ motherboard, and RMClock only goes as low as 1.18 volts. Is there a simple bsel type mod to set the base voltage lower by say 0.1v or even 0.2v?
thanks
d
is there a pin mod to undervolt on socket 775
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
I don't know the default voltage of your Celeron so can't give the exact pins,
Page 45 of this pdf shows the location of the VID pins (when looking at the mainboard), page 15 shows how to get the voltages.
http://download.intel.com/design/proces ... 316963.pdf
Connecting the VID pin to ground sends a 0 while insulating the pin sends a 1 to the motherboard
Page 45 of this pdf shows the location of the VID pins (when looking at the mainboard), page 15 shows how to get the voltages.
http://download.intel.com/design/proces ... 316963.pdf
Connecting the VID pin to ground sends a 0 while insulating the pin sends a 1 to the motherboard