my north bridge (AMD 770) runs hot and the heatsink that came with my board is small.
I was wondering if anyone had experience with any of these?
http://www.newegg.ca/Product/Product.as ... 6835233021
http://www.newegg.ca/Product/Product.as ... 6835118014
http://www.newegg.ca/Product/Product.as ... 6835118214
i just dont know how much heatsink I need to keep my AMD 770 cool in my quiet, low airflow system.
Is a minitower with heatpipes overkill for a northbridge?
north bridge heatsinks: any experience with these?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
Re: north bridge heatsinks: any experience with these?
It really depends how much cooling that chip is worth to you ! Also, it's hard to tell without knowing what motherboard you have.
Maybe a little cardboard duct over the heatsink to direct some airflow over it would be the cheapest option... ?
Back on topic :
ZM-NB47J is pretty decent in my experience, if the chipset isn't overly hot. The mounting system isn't the easiest (small screws (grrrr) and final adjustments are a pain) but it works. If your chipset really gets toasty (if you overclock like crazy for example), I don't think it's your best bet.
The best chipset cooler I've played with is the Thermalright HR-05 IFX. It performs great with little airflow and it fits an 80mm fan if you really want major cooling. The mounting system is a little better, but you need to remove the motherboard. And it's expensive too (24.99 $ on frozencpu).
That Xigmatech you list has a weird mounting system it seems... You should check it before you buy.
Maybe a little cardboard duct over the heatsink to direct some airflow over it would be the cheapest option... ?
Back on topic :
ZM-NB47J is pretty decent in my experience, if the chipset isn't overly hot. The mounting system isn't the easiest (small screws (grrrr) and final adjustments are a pain) but it works. If your chipset really gets toasty (if you overclock like crazy for example), I don't think it's your best bet.
The best chipset cooler I've played with is the Thermalright HR-05 IFX. It performs great with little airflow and it fits an 80mm fan if you really want major cooling. The mounting system is a little better, but you need to remove the motherboard. And it's expensive too (24.99 $ on frozencpu).
That Xigmatech you list has a weird mounting system it seems... You should check it before you buy.
Re: north bridge heatsinks: any experience with these?
I agree with frenchie. Having used both the ZM-NB47J and the HR-05 IFX myself, go for the HR-05 for the NB. I've used the NB47J on a SB instead (it fits!) but without some airflow it can get a little hot. I imagine using it on a NB with an IGP it would get hotter still.frenchie wrote:ZM-NB47J is pretty decent in my experience, if the chipset isn't overly hot. The mounting system isn't the easiest (small screws (grrrr) and final adjustments are a pain) but it works. If your chipset really gets toasty (if you overclock like crazy for example), I don't think it's your best bet. The best chipset cooler I've played with is the Thermalright HR-05 IFX. It performs great with little airflow and it fits an 80mm fan if you really want major cooling. The mounting system is a little better, but you need to remove the motherboard. .
Re: north bridge heatsinks: any experience with these?
In the past I have been known to put the NB cooler on the SB and upgrade the NB with an aftermarket one.
The stock ones always seemed a little undersized. Be watchful of your upgrade blocking pci slots.
The stock ones always seemed a little undersized. Be watchful of your upgrade blocking pci slots.
-
- *Lifetime Patron*
- Posts: 2000
- Joined: Tue May 15, 2007 1:39 am
- Location: Finland
Re: north bridge heatsinks: any experience with these?
+1 for the Zalmans, used both with good results. I've always had a direct path for cooling airflow from an intake fan though, would consider heatpipes in a low-flow setting.
Re: north bridge heatsinks: any experience with these?
yeah, i had to get an HR-05 IFX (and got an SLI, too, for sb) for my ill-fated X58 Pro (nb would hit 100C .. and beyond, then shut off). it's great if you have room in your case for it!