Anyone have SEASONIC 300W + DFI LanParty UT nF4 Ultra-D ?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar
Anyone have SEASONIC 300W + DFI LanParty UT nF4 Ultra-D ?
I cannot get my computer to boot to bios with seasonic 300w.
My question is if someone here has the same psu and motherboard and perhaps a simular graphics card like mine (X800XL powercolor) and that can confirm that it works.
My question is if someone here has the same psu and motherboard and perhaps a simular graphics card like mine (X800XL powercolor) and that can confirm that it works.
-
- Posts: 235
- Joined: Tue Jan 18, 2005 7:55 pm
-
- Posts: 235
- Joined: Tue Jan 18, 2005 7:55 pm
When I connect the x800XL to the monitor through an adapter I get nothing whatsoever on the screen. I got memory sticks in the orange slots (slot 2 and 4).
Extra power connected to x800xl through an adapter.
2 powercables from the psu to the motherboard.
Zalman reserator watercooling on the cpu and the vga.
A fan on the northbridge.
There are 4 LED's on the motherboard, only the leftmost one is lit, it means that VGA is detected according to the manual.
The above is only true if there is no connection to the monitor, if I plug in the cable to the monitor I get 3 shining LED's and still no picture
No HD is connected atm but I should still be able to get a picture on my screen right? (My HD is in my old computer so I can access the Internet and type this mesage )
Extra power connected to x800xl through an adapter.
2 powercables from the psu to the motherboard.
Zalman reserator watercooling on the cpu and the vga.
A fan on the northbridge.
There are 4 LED's on the motherboard, only the leftmost one is lit, it means that VGA is detected according to the manual.
The above is only true if there is no connection to the monitor, if I plug in the cable to the monitor I get 3 shining LED's and still no picture
No HD is connected atm but I should still be able to get a picture on my screen right? (My HD is in my old computer so I can access the Internet and type this mesage )
I just bought the psu.
Its a 20pin connector so I have to use the 20->24pin converter.
Ratings on the psu:
+3.3V +5V +12V -12V +5V
28A 30A 18A 0.8A 2A
Anyway I found the problem, apperantly DFI Lanparty has 4 powerconnections on the board. I only connected the 2 regular ones, I forgot the FDD and HDD-type. So I was happy and plugged them in and pressed power. BOOM psu dead. So I guess I have to buy a new and stronger psu like an s12-430 with a native 24-pin connector.
Its a 20pin connector so I have to use the 20->24pin converter.
Ratings on the psu:
+3.3V +5V +12V -12V +5V
28A 30A 18A 0.8A 2A
Anyway I found the problem, apperantly DFI Lanparty has 4 powerconnections on the board. I only connected the 2 regular ones, I forgot the FDD and HDD-type. So I was happy and plugged them in and pressed power. BOOM psu dead. So I guess I have to buy a new and stronger psu like an s12-430 with a native 24-pin connector.