Does the fan connector in this power supply use the standard 3 pin header and is it easily detachable from it's PCB?
Also, anyone know if a Globe 120 mm fan would fit inside the casing correctly?
And will the power supply function if nothing is connected to the pcb's fan header? (I would use an externally mounted knob to control fan speed)?
How can I replace the 120mm fan in a Fortron FSP-350?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar
No, the fan is soldered to a fan controller. You have to snip the wires, or remove the fan controller and solder them off.
Here's a pic of the innards (taken from the SPCR's FSP Aurora review). The fan controller is the greenish square PCB visible in the PSU.
The wires from the fan controller are long enough to do a fan swap (see the pic, they are wound around the bundle of wires that leave the PSU). IMO any normal (25 mm thick) fan will fit there.
I didn't test whether the PSU would function without any fan connected to the controller.
Here's a recent discussion about FSP-350 fan swapping.
Cheers,
Jan
Here's a pic of the innards (taken from the SPCR's FSP Aurora review). The fan controller is the greenish square PCB visible in the PSU.
The wires from the fan controller are long enough to do a fan swap (see the pic, they are wound around the bundle of wires that leave the PSU). IMO any normal (25 mm thick) fan will fit there.
I didn't test whether the PSU would function without any fan connected to the controller.
Here's a recent discussion about FSP-350 fan swapping.
Cheers,
Jan
-
- Friend of SPCR
- Posts: 889
- Joined: Sun Dec 05, 2004 11:34 pm
- Location: Finland -- Folding For SPCR
Hi guys
The FSP300-60PN(PF) worked okay without a fan connected to the fan controller PCB. So I'm 99,9% sure, that the 350W version works that way too. I don't know if any PSU has some sort of current sensing on the PSU fan, that would shutdown the PSU if the fan was failing.
If you got any questions, just ask.
The FSP300-60PN(PF) worked okay without a fan connected to the fan controller PCB. So I'm 99,9% sure, that the 350W version works that way too. I don't know if any PSU has some sort of current sensing on the PSU fan, that would shutdown the PSU if the fan was failing.
If you got any questions, just ask.