phenom2 24c idle. could that be right?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 13
- Joined: Wed Dec 09, 2009 10:13 am
- Location: somewhere
phenom2 24c idle. could that be right?
running ubuntu 9.10 and using the not yet included k10temp module. It says my cpu is 24c idle. could that be right? theres a chance this mod is broken, or just needs a multiplier or offset applied
msi 790fx-gd70
65 watt 2.6ghz phenom2
tx-3 paste
tniq propeller
raven2 (bottom fans set to low)
lcd on motherboard keeps flipping between 26 and 27, dont know what its mesuring. cant find this in the manual. cpu temp was 27 in bios.
just rebooted, bios says cpu 31 and system 41, os still says 24 for cpu. motherboard says 27.
msi 790fx-gd70
65 watt 2.6ghz phenom2
tx-3 paste
tniq propeller
raven2 (bottom fans set to low)
lcd on motherboard keeps flipping between 26 and 27, dont know what its mesuring. cant find this in the manual. cpu temp was 27 in bios.
just rebooted, bios says cpu 31 and system 41, os still says 24 for cpu. motherboard says 27.
-
- Posts: 419
- Joined: Mon Aug 31, 2009 12:30 am
- Location: Italy
-
- Posts: 13
- Joined: Wed Dec 09, 2009 10:13 am
- Location: somewhere
from the k10temp patch
so the 22c its at now is accurate, just not what i thought it meant.+ Tctl is the processor temperatur control value, used by the platform to
+ control cooling systems. Tctl is a non-physical temperature on an arbitrary
+ scale measured in degrees. It does _not_ represent an actual physical
+ temperature like die or case temperature. Instead, it specifies the
+ processor temperature relative to the point at which the system must supply
+ the maximum cooling for the processor's specified maximum case temperature
+ and maximum thermal power dissipation.
-
- Posts: 322
- Joined: Sun Dec 09, 2007 12:53 pm
- Location: EU, USA
-
- Posts: 13
- Joined: Wed Dec 09, 2009 10:13 am
- Location: somewhere
-
- Posts: 322
- Joined: Sun Dec 09, 2007 12:53 pm
- Location: EU, USA
Windows utilities like coretemp and speedfan work ok. I'll have to check for new K10 cpu temp driver in ubuntu.pixelfairy wrote:from source.Rebellious wrote:That sounds about right, my Phenom II idles at 22-24C.
This must be the new K10 driver for lm-sensors, how did you install it?
how do you know your cpu temp without it?