Asus P5B Deluxe and Ninja Plus Rev B (SCNJ1100P)?

mits · Post by **mits** » Fri Jan 26, 2007 2:18 am

Hi all,
I plan to build a new system based on a C2D E6600. Motherboard will be an Asus P5B Deluxe and for cpu cooler i'm thinking about the new Ninja. So i would like to know if there are any clearance problems around the socket with this heatsink (problems like this one viewtopic.php?t=37633).
I'm also considering the following coolers:
1. Thermalright Ultra 90 for socket 775 with a Nexus 92mm
2. Scythe Mine
(note: I do not plan to overclock the system)

Which cooler do you suggest?

Mav-VRX · Post by **Mav-VRX** » Fri Jan 26, 2007 3:29 am

I don't have any clearance problems on my Asus P5B Deluxe Wi-FI AP with the Scythe Ninja B.

xenithon · Post by **xenithon** » Fri Jan 26, 2007 4:35 am

Check this out

"...mounting bracket supplied with Ninja PLUS Rev. B CPU Cooler does fit without interfering or touching the components..."

Above image is showing the ASUS P5B Deluxe motherboard

mits · Post by **mits** » Sun Jan 28, 2007 10:01 am

Thanks a lot guys. So i will go for the ninja!