E-A-R/PVC isolators for 120mm fans. K8 or K6?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 73
- Joined: Sat May 17, 2003 8:25 pm
- Location: Thornhill, Ontario
E-A-R/PVC isolators for 120mm fans. K8 or K6?
hey,
I am going to buy some melamine from McMaster-Carr and wanted to buy some of the fan isolators. From previous threads it seems either K8 or K6 will work, but i couldn't find where it specifies which works with which.
Took out a ruler and tried to measure which ones would work, but my measurements aren't precise enough for me to be sure.
Which ones are the ones that fit 120mm fans, specifically in the Sonata?
Will the ones used for smaller 80/92mm fans still work with 120mm?
Thanks!
I am going to buy some melamine from McMaster-Carr and wanted to buy some of the fan isolators. From previous threads it seems either K8 or K6 will work, but i couldn't find where it specifies which works with which.
Took out a ruler and tried to measure which ones would work, but my measurements aren't precise enough for me to be sure.
Which ones are the ones that fit 120mm fans, specifically in the Sonata?
Will the ones used for smaller 80/92mm fans still work with 120mm?
Thanks!
-
- Posts: 1283
- Joined: Thu Aug 07, 2003 2:43 pm
- Location: Charlotte, NC, USA
Search all terms: Mcmaster ear panaflo
I think there is a thread that listed out a summary of ear vs mcmaster part numbers.
When you get your order, could you please post how the item was shipped, shipping cost, etc, as I wouldn't mind doing a mail order myself at a later date.
I was actually at the Westmont location on the 5th, but won't get back to Chicago until next summer.
I think there is a thread that listed out a summary of ear vs mcmaster part numbers.
When you get your order, could you please post how the item was shipped, shipping cost, etc, as I wouldn't mind doing a mail order myself at a later date.
I was actually at the Westmont location on the 5th, but won't get back to Chicago until next summer.
-
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
There's actually many threads that summarize this topic. I just searched for "5801k6" and got 16 hits. "5801k8" gave me 19 hits. I bet at least half of those threads answer lazybum131's question.Riffer wrote:Search all terms: Mcmaster ear panaflo
I think there is a thread that listed out a summary of ear vs mcmaster part numbers.
-
- Posts: 73
- Joined: Sat May 17, 2003 8:25 pm
- Location: Thornhill, Ontario
it was pretty late when i posted...didn't even think about searching for the exact model number codes. searching for EAR came up with mostly unrelated posts. Did find the thread about Mcmaster-carr and EAR labelling, but they didn't specify in that thread.
Thanks for the clarification!
I can tell you how the packaging is, but shipping won't apply to you, I live in Canada. I emailed them before, they said shipping would be around $6-7 using Purolater. Pretty good for crossing the border. And they said no additional brokerage or duty fees would be added! Which is definitely better then shipping up to here using UPS or Fedex.When you get your order, could you please post how the item was shipped, shipping cost, etc, as I wouldn't mind doing a mail order myself at a later date.
You must still be tired - Check out my Location - City of Toronto - I am not exactly sure where Thornhill is, but I think it is fairly closelazybum131 wrote:I can tell you how the packaging is, but shipping won't apply to you, I live in Canada. I emailed them before, they said shipping would be around $6-7 using Purolater. Pretty good for crossing the border. And they said no additional brokerage or duty fees would be added! Which is definitely better then shipping up to here using UPS or Fedex.When you get your order, could you please post how the item was shipped, shipping cost, etc, as I wouldn't mind doing a mail order myself at a later date.
I was thinking of the Melamine, being pretty bulky, might cost a few extra $.
-
- Posts: 73
- Joined: Sat May 17, 2003 8:25 pm
- Location: Thornhill, Ontario
lol, yah i am still tired. Never seem to be able to go to bed on time! Kept nodding off during my lectures; I posted on the forums during my break at school.
Thornhill's just north of Toronto, just got back home from Downtown in fact. So shipping should probably be the same.
Using my sister's laptop right now, once I get on my computer I'll quote from the email McMaster-Carr sent about shipping costs.
Thornhill's just north of Toronto, just got back home from Downtown in fact. So shipping should probably be the same.
Using my sister's laptop right now, once I get on my computer I'll quote from the email McMaster-Carr sent about shipping costs.
-
- Posts: 73
- Joined: Sat May 17, 2003 8:25 pm
- Location: Thornhill, Ontario
and their reply was:Hello,
I'm interested in buying three or four pieces of "Melamine Foam Sound Absorbing Ceiling Tiles" (part # 9216T1).
Before I order I want to know how much it would cost to ship up to Canada?
Sincerely,
Stephen
Approximate shipping charges to Canada would be $5.71. We ship Purolator, brokerage and duty-free.
Bruce,
McMaster-Carr
That is sweet!lazybum131 wrote:and their reply was:Hello,
I'm interested in buying three or four pieces of "Melamine Foam Sound Absorbing Ceiling Tiles" (part # 9216T1).
Before I order I want to know how much it would cost to ship up to Canada?
Sincerely,
Stephen
Approximate shipping charges to Canada would be $5.71. We ship Purolator, brokerage and duty-free.
Bruce,
McMaster-Carr
-
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
Dayem! It would cost that much to ship from McMaster to me and I only live about 15 miles away from them. That's almost enough to make me want to move to Canada. Too bad other US dealers won't use that Purolator shipping service.Approximate shipping charges to Canada would be $5.71. We ship Purolator, brokerage and duty-free.
Bruce,
McMaster-Carr