How can I get my 6800 GT to report temp and fan speed 2 MBM5
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
How can I get my 6800 GT to report temp and fan speed 2 MBM5
Ive been trying for days and cant figure it our
By MBM5 i mean Motherboard Monitor 5(latest release)
needed system specs(?):
MB: Asus P4C800
CPU: P4 3.0 HT 1MB L2 Cache (Prescott Core)
GPU: 256MB 6800 GT
OS: Windows XP Pro, SP2
By MBM5 i mean Motherboard Monitor 5(latest release)
needed system specs(?):
MB: Asus P4C800
CPU: P4 3.0 HT 1MB L2 Cache (Prescott Core)
GPU: 256MB 6800 GT
OS: Windows XP Pro, SP2
-
- Posts: 43
- Joined: Wed Feb 16, 2005 4:01 pm
- Location: UK
Yes the card reports at least the tempature to the nVidia control panel. I know it can be done because ive seen benchmark tests (on this site even) that used this function to monitor temp. The problem is that MBM Forums and FAQs are dead at least for the last few days Ive been trying. I have emailed the dev of MBM5 but havent gotten a response yet I came here cause the benchmark/review was done through this site....
Joe, I see you haven't been welcomed yet so,
WELCOME TO SPCR !!!
As for your problem, maybe you know, the MBM author has stopped support & development for it. So unless it can report temps in its current state, I'll very much doubt that it can be made to in the future - or that you'll ever get a reply.
Have you tried the many options in the General menu? You could also use speedfan and see if it recognises the VGA temp sensor. If it does then you could look up from which sensor chip it reads the data, go into the MBM config files and try adding it manually. I know, really difficult but I have an ancient Radeon 9700 with no temp sensor and this is all I can guesstimate.
Good luck.
WELCOME TO SPCR !!!
As for your problem, maybe you know, the MBM author has stopped support & development for it. So unless it can report temps in its current state, I'll very much doubt that it can be made to in the future - or that you'll ever get a reply.
Have you tried the many options in the General menu? You could also use speedfan and see if it recognises the VGA temp sensor. If it does then you could look up from which sensor chip it reads the data, go into the MBM config files and try adding it manually. I know, really difficult but I have an ancient Radeon 9700 with no temp sensor and this is all I can guesstimate.
Good luck.