Antec NSK2400 Media PC Case
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
Antec NSK2400 Media PC Case
Antec NSK2400 Media PC Case
Update, December 21, 2006: A postscript about the Antec Fusion (A higher end HTPC model) has been added.
Update, December 21, 2006: A postscript about the Antec Fusion (A higher end HTPC model) has been added.
-
- Posts: 580
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: USA (Phoenix, AZ)
Nice review! I have this case for my HTPC computer and I LOVE it. If my main machine was MicroATX, I'd use this case for it as well.
On page 5 the all-copper Zalman heatsink became an aluminum/copper 120mm version modded with a Nexus fan. I didn't see this change in the text anywhere... Or did I miss it?
On page 5 the all-copper Zalman heatsink became an aluminum/copper 120mm version modded with a Nexus fan. I didn't see this change in the text anywhere... Or did I miss it?
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
You're right -- I completely forgot about that HSF change. Too much data in this review, my bad, will hasten to correct.josephclemente wrote:Nice review! I have this case for my HTPC computer and I LOVE it. If my main machine was MicroATX, I'd use this case for it as well.
On page 5 the all-copper Zalman heatsink became an aluminum/copper 120mm version modded with a Nexus fan. I didn't see this change in the text anywhere... Or did I miss it?
PS -- CORRECTIONS MADE
-
- Posts: 107
- Joined: Sat Apr 15, 2006 9:59 pm
- Location: California
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
You'd have to have them side by side with the case to tell, and it might change with different lighting. Ask Ralf Hutter about using dyes to custom color match optical drive bezels.alphabetbackward wrote:Would the NEC 3550 DVD-burner look okay? The silver one that is. For that matter, would the ASUS one? Basically, the few silver DVD-burners on Newegg.
Excellent review as always!
I'm glad that you've invested 8 pages on this well-designed case. Well worth it!
Btw, I wish you could've suggested more options for HSF since the choice seems somewhat limited due to the short height. For example, I wonder if it's possible to passively cool a low-power CPU since this case has two fans close to the CPU zone. I totally understand you couldn't put any more info into already-too-long article though.
I'm glad that you've invested 8 pages on this well-designed case. Well worth it!
Btw, I wish you could've suggested more options for HSF since the choice seems somewhat limited due to the short height. For example, I wonder if it's possible to passively cool a low-power CPU since this case has two fans close to the CPU zone. I totally understand you couldn't put any more info into already-too-long article though.
Last edited by eternizer on Thu Apr 20, 2006 10:47 pm, edited 3 times in total.
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
Elsewheere, I did list a bunch of HS that did NOT fit... found it (in another NSK2400 thread) --
"The distance from the top of a mounted CPU to the chassis cover is 4.75" or 12cm. The HS must be shorter than this.
"HS that will not fit include Scythe Ninja, Katana, Arctic Cooling Freezer 7/64 Pro, Thermalright HR-01 and Zalman 9500 (altho you could bend the top fins of the 9500 to force it... it's about a quarter inch too tall.)
"The original Arctic Cooling Freezer HS are 11cm & will thus fit. So will almost all top mounted fan HS, including the Thermalright SP120/92. As long as the fin orientation is left / right (not front / back) when mounted on the board, and the fin spacing is not too tight, any decent size HS will work well.
"Spire just sent me a vertical HS sample that fits -- SP601B3 The fin spacing looks too tight for great low airflow performance.... tho it might be good enough for a lot of CPUs. "
"The distance from the top of a mounted CPU to the chassis cover is 4.75" or 12cm. The HS must be shorter than this.
"HS that will not fit include Scythe Ninja, Katana, Arctic Cooling Freezer 7/64 Pro, Thermalright HR-01 and Zalman 9500 (altho you could bend the top fins of the 9500 to force it... it's about a quarter inch too tall.)
"The original Arctic Cooling Freezer HS are 11cm & will thus fit. So will almost all top mounted fan HS, including the Thermalright SP120/92. As long as the fin orientation is left / right (not front / back) when mounted on the board, and the fin spacing is not too tight, any decent size HS will work well.
"Spire just sent me a vertical HS sample that fits -- SP601B3 The fin spacing looks too tight for great low airflow performance.... tho it might be good enough for a lot of CPUs. "
Yeh, I saw that and thus I thought you would try the Spire one and tell us how it performs in NSK2400. Or SI-120 passively... Well, just my thought. Perhaps a CPU fan won't add much noise unless you replace all other stock fans. Anyway, already great review~
Btw, the original AC Freezer is 12cm, not 11cm (at least the spec says so). So, it's a tough call...
Btw, the original AC Freezer is 12cm, not 11cm (at least the spec says so). So, it's a tough call...
-
- Posts: 539
- Joined: Fri Apr 04, 2003 6:35 am
- Location: Cambridgeshire, England
I agree, it's awesome.qviri wrote:I have no typos to report, so I'll just say:
That's awesome.
I do have a typo to report however:
From page-5
The most important results of the PSU testing:
* The base noise level is low but not the best, measuring 24 dBA@1m
* The PSU fan ramped up only when the intake temperature reached 32°C.
* The PSU ran quite cool; it's a good candidate for a slower, quieter fan swap.
* Efficiency is quite high, well above 80% in the 150W~300W range.
* Voltage regulation was excellent, as was Power Factor, which just just about perfect.
double "just" which I imagine the first one should be "was".
Excellent review Mike.
-
- *Lifetime Patron*
- Posts: 1464
- Joined: Mon Dec 29, 2003 2:51 am
- Location: Elk Grove, CA
- Contact:
I am definately happy to see this review, Mike. After being with Ed, Russ, and Charlie @ CES, I definately did get to become VERY familiar with this case. Definately has a lot of potential as well as flexibility in varying customer needs. I myself plan on getting one to use as a HTPC, with probably a fanless 7600GS, Athlon 3700+ San Diego, a single 74 GB Raptor and maybe one of 'them new 750 GB Seagate 7200.10's w/perpendicular tech when they come out!
As for pricing, NewEgg has it for $80 I think, but Fry's has it for $100. I am always wary about ordering cases online... =[
As for pricing, NewEgg has it for $80 I think, but Fry's has it for $100. I am always wary about ordering cases online... =[
Once again a great creative airflow path... The downside though, is that all sides of this case have some sort of intake/exhaust, which might be ok for those of you in the US with a huge living room and a huge A/V rack with lots of space, but for those that are tight on space this could be a problem... Although I don't see any other way of making a quiet HTPC case that's any better in this aspect...
Wow! I am really amazed by this case. Definitely my next case if I get enough money from summer job (I mean after buying new VGA-card and motherboard).
Antec really has been THE casemaker after P180. No one can really challenge them in silent cases. Also I like Antec's design, especially in P150 and this case.
Antec really has been THE casemaker after P180. No one can really challenge them in silent cases. Also I like Antec's design, especially in P150 and this case.
-
- Posts: 77
- Joined: Fri Nov 19, 2004 4:41 am
- Location: Italy
- Contact:
very good review Mike, as usual..., very interesting the various configs to match the most silent combination.
A couple of questions:
would you say that those new fans from Scythe are quiter than the "usual" Nexus ?
I believe that CPU temps should drop down a bit using a Thermalright XP90/90-C with a low noise fan ? Right ?
Maybe the perfect config would have been with a Smartdrive 2002C below the optical drive.
A bit of a shame Antec did not include a firewire connector on the front... and why Antec does not sell many cases WITHOUT the PSU ?
Nik
A couple of questions:
would you say that those new fans from Scythe are quiter than the "usual" Nexus ?
I believe that CPU temps should drop down a bit using a Thermalright XP90/90-C with a low noise fan ? Right ?
Maybe the perfect config would have been with a Smartdrive 2002C below the optical drive.
A bit of a shame Antec did not include a firewire connector on the front... and why Antec does not sell many cases WITHOUT the PSU ?
Nik
Mike,
You state in the conclusion:
Maybe we could get some real stress testing with a couple of 7900GTXs!
You state in the conclusion:
I don't see any reason why the case wouldn't support the eVGA 131-K8-NF44-AX.Sure, it doesn't allow SLI to be used, but given how few people actually use SLI, it could find a good niche in the gaming market.
Maybe we could get some real stress testing with a couple of 7900GTXs!
Last edited by QuietOC on Sun Apr 23, 2006 9:32 am, edited 3 times in total.
-
- Posts: 26
- Joined: Mon Jul 18, 2005 2:30 am
its probably the best HTPC style case ive ever seen to date. their are some critics id like to make about the review. just things i wish you would have done differently.
a Ninja running fanless next to the exhaust fans.
a "passive" system (ie: no fans on the video card, cpu heatsink, or any other heatsinks), using just the 2x 120mm case fans (nexus running at 5-7v), and a seasonic PSU with a nexus fan swap in it.
an attempt at suspension on the hard drives
--------------------------------------------------------------
the only things i saw i didnt like about the case.
i wouldve liked to see vents on the bottom of the case below the PSU. so you can have 120mm fan psu's pull cool air straight from below the case.
and stealth drive bays for the optical drives. black is easy to match, but their seems to be a million different shades of silver.
a Ninja running fanless next to the exhaust fans.
a "passive" system (ie: no fans on the video card, cpu heatsink, or any other heatsinks), using just the 2x 120mm case fans (nexus running at 5-7v), and a seasonic PSU with a nexus fan swap in it.
an attempt at suspension on the hard drives
--------------------------------------------------------------
the only things i saw i didnt like about the case.
i wouldve liked to see vents on the bottom of the case below the PSU. so you can have 120mm fan psu's pull cool air straight from below the case.
and stealth drive bays for the optical drives. black is easy to match, but their seems to be a million different shades of silver.
-
- Posts: 1386
- Joined: Fri Jun 18, 2004 6:53 pm
-
- Posts: 15
- Joined: Tue Mar 07, 2006 4:00 pm
Good review and very well thought case as it seems .
In my opinion, it could be an almost perfect case if it weren't for the lack of:
1- A frontal FireWire 400 port.
2- Stealth drive bays for the optical drives.
3- A quieter PSU fan.
Adding this wouldn't cost, probably, more than $10 to the final cost. I would be willing to pay those $10. If building a totally new system that will cost you from $700 to $1000, what are $10 on such budget?
What is the opinion of Silentpcreview readers? Would you trade a slightly higher price for those features?
In my opinion, it could be an almost perfect case if it weren't for the lack of:
1- A frontal FireWire 400 port.
2- Stealth drive bays for the optical drives.
3- A quieter PSU fan.
Adding this wouldn't cost, probably, more than $10 to the final cost. I would be willing to pay those $10. If building a totally new system that will cost you from $700 to $1000, what are $10 on such budget?
What is the opinion of Silentpcreview readers? Would you trade a slightly higher price for those features?
I get the feeling some of these features will be on the high end version of this case, the Fusion. Keep in mind that this is a low end case after all.learning_bird wrote:Good review and very well thought case as it seems .
In my opinion, it could be an almost perfect case if it weren't for the lack of:
1- A frontal FireWire 400 port.
2- Stealth drive bays for the optical drives.
3- A quieter PSU fan.
Adding this wouldn't cost, probably, more than $10 to the final cost. I would be willing to pay those $10. If building a totally new system that will cost you from $700 to $1000, what are $10 on such budget?
What is the opinion of Silentpcreview readers? Would you trade a slightly higher price for those features?
-
- Posts: 189
- Joined: Sat Jun 05, 2004 12:56 pm
- Location: Houston, Texas
- Contact:
I don't think PSUs have vents at the top (which would be the bottom in this case).Aris wrote:the only things i saw i didnt like about the case.
i wouldve liked to see vents on the bottom of the case below the PSU. so you can have 120mm fan psu's pull cool air straight from below the case.
On another note, I would have liked a front Firewire port (6-pin)... and stealthed drive bays and a VFD and a volume knob. But this is a budget case, and all of those features are available on the Fusion. Plus, the Fusion has a real aluminum front panel.
I might spring for the Fusion, but I can't get over the sheer value you get with this case. It's cleverly designed and well thought out in all departments. The first case I would buy for an HTPC without hesitation!
Oh, and a great review, SPCR. Very well written! Aside from the correction of a few punctuation errors (I'm a perfectionist ), I would have liked to see some comments on heatsink compatibility. I know that Mike has discussed this issue in another thread, but I would have liked it here just for the sake of completeness in a product review.
Thanks and keep up the good work!
Regards,
KTK
-
- Posts: 216
- Joined: Mon May 24, 2004 10:42 pm
- Location: Canada
1 - don't care personally, but I can see how it would matter to otherslearning_bird wrote:In my opinion, it could be an almost perfect case if it weren't for the lack of:
1- A frontal FireWire 400 port.
2- Stealth drive bays for the optical drives.
3- A quieter PSU fan.
Adding this wouldn't cost, probably, more than $10 to the final cost. I would be willing to pay those $10. If building a totally new system that will cost you from $700 to $1000, what are $10 on such budget?
What is the opinion of Silentpcreview readers? Would you trade a slightly higher price for those features?
2 - would have been nice, but I'd rather have had a black front
3 - don't care (most of us rarely find stock fans acceptable regardless)
In the opinion of this SPCR reader, there is exactly one thing this case desperately needs--an extra 30+mm in height above the CPU.
Also, it would have been nice if there were an optional slot in the main partition to allow a full size motherboard to fit. The power supply mounting would have to be raised a bit, of course.