Hi again;
@ Skirge;
Thanks, good to know I did decent
![Wink ;)](./images/smilies/icon_wink.gif)
. I really don't know where else to move them without cutting holes :/. Any ideas?
Speed fan has no config for my motherboard [ Striker II Formula ] so it's hard to know what is what, and believe me, I've tried. The best I can get out of it is the CPU temps. Then I could use EVGA Precision for GPU temps and Asus AI Suite for system temps.
Yes, I have the stock Stacker 830 fan right there. The airflow is VERY weak, worse than that of the 80mm stealths [ probably due to a meshed door, then a meshed 5.25" thing with a dust filter after the metal mesh ]. The exhaust fan, though, is strong and its also stock with the case.
I have tried adding the fans on the side, but, 80mm fans which are all I have for now are so crappy that the case [ Designed for 60-140mm on the side ] won't work easy at all and vibrate a lot. *Due to poor installation* ]
Although the two fans might be impeding airflow [ Which I pretty much would say is minuscule at most, since the intake fan, again, is weak from the start ], they are keeping the temperatures lower. The NB, I know, is supposed to run hot. BUT, this individual motherboard has issues at passive from some reviews and causes BSODs ( To some ) without any airflow on it. I have been having BSODs every once in a while [ Probably from a million other things though ], but I want to be safe. I don't want a $300 mobo dying on me.
------------------------
@ Thejamppa;
Thanks. Besides looking better, is there any real use? I know that that it looks great, but.. well, since I plan on screwing with my system for a while longer I don't see it being useful.
--------------------------------
@ NeilBlanchard;
PSU; since I can't see my system right now, I would have to guess, and I would say two 80mm's.
Then the intake and exhaust are 120mm.
Intel is something like that, but it really is pretty quiet.
Two [ semi-silent + extremely strong ] VRM coolers, yep.
And last, yep, two loud Stealth fans.
Then the GPU is something around 60mm. Its 45DB at max and 20CFM.
I will get pics of the grills.
--------------------------
@ tehcrazybob;
I really want it to last long though :/. The warranty does cover the 2.2V, but its just an eyesore and hardly damaging to airflow. I figure the fan on the memory is useful.
Mentioned the NB earlier, and it has instability issues for many without fans. Not sure if it will be for me, too, but I'd rather not have to worry about it.
Again, I might when I get the cash. This stock cooler though is quite good, and many people say its not even worth getting a new one. Inaudible at 40%, and its not bad temps either.
Lastly, that PSU calculator [ Which I had to change on a few things since it doesn't have everything exactly ] gave
705 watts. Hah, so, with the exact items I would have to imagine another 50-100 watts or so. The PSU calculator I used couldn't have been too bad, then. Probably quite accurate, actually.