ASUS EN9600GSO/DI/512MD3/V2 GeForce 9600 GSO 512MB 128-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
![Image](http://i257.photobucket.com/albums/hh224/Term_One/Capture.jpg)
![Image](http://i257.photobucket.com/albums/hh224/Term_One/Capture2.jpg)
ASUS support page:
http://usa.asus.com/product.aspx?P_ID=CIZSDULRZI4VCsZ8
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
It seems like whats in bold will pertain to me.Replace the fan
Most chipset fans are 40x40x10mm, and Papst/EBM makes an excellent replacement fan called 412FM, however, many gfx cards and chipsets use special mountings for the fans, which makes it impossible to replace the fan with a standard fan. If this is the case you will need to buy another chipset cooler and then replace the fan. Fortunately I haven't had this problem myself yet.![]()
Replace the heatsink/fan combo with a large heatsink
This would be my preferred solution, but you should beware that the risk of overheating can be pretty high, so be sure to monitor the temperature. It might be a good idea to combine a large heatsink with ducting or a slot cooler, both could use low-noise 80mm fans as listed on the case fans page.
I can't figure out what PWM means? Anyone?SebRad wrote:so no PWM control.