Replacement pumps for Reserator 1 Plus
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
Replacement pumps for Reserator 1 Plus
I have a Zalman Reserator 1 Plus, which has worked extremely well over the years. However, the pump has gotten noisy and now produces a sound with a of a quality somewhere between churning and bubbling. Even though the cooling is still good, the sound is distracting and I am thinking of replacing the pump.
However, I have no knowledge about water pumps. I want a good, reliable and quiet pump that works with the Reserator 1 Plus. Can someone here tell me about what options that exists today?
However, I have no knowledge about water pumps. I want a good, reliable and quiet pump that works with the Reserator 1 Plus. Can someone here tell me about what options that exists today?
-
- Posts: 266
- Joined: Wed Mar 31, 2010 8:19 am
- Location: OV, The Netherlands
Thanks for the fast reply!
We're talking about these pumps, and they will fit into the Reserator 1 tower, right?
http://www.swiftnets.com/products/mcp350.asp
http://www.swiftnets.com/products/mcp355.asp
They're listed as 24--26 and 30--32 dBA, respectively; anyone who knows how loud they're in relation to the pump shipped with the Reserator? Also, they have an temperature envelope topping at 60C, which seems like a temperature possible to achieve, is it dangerous to exceed this?
We're talking about these pumps, and they will fit into the Reserator 1 tower, right?
http://www.swiftnets.com/products/mcp350.asp
http://www.swiftnets.com/products/mcp355.asp
They're listed as 24--26 and 30--32 dBA, respectively; anyone who knows how loud they're in relation to the pump shipped with the Reserator? Also, they have an temperature envelope topping at 60C, which seems like a temperature possible to achieve, is it dangerous to exceed this?
-
- Posts: 266
- Joined: Wed Mar 31, 2010 8:19 am
- Location: OV, The Netherlands
Yep i was meaning those pumps.Mikademus wrote:Thanks for the fast reply!
We're talking about these pumps, and they will fit into the Reserator 1 tower, right?
http://www.swiftnets.com/products/mcp350.asp
http://www.swiftnets.com/products/mcp355.asp
They're listed as 24--26 and 30--32 dBA, respectively; anyone who knows how loud they're in relation to the pump shipped with the Reserator? Also, they have an temperature envelope topping at 60C, which seems like a temperature possible to achieve, is it dangerous to exceed this?
Installed a watercooling system for a friend last wenesday with a 355 pump (i dont watercool but he needed help with mounting the blocks and filling).
Those pumps are inaudible at a lower rpm/voltage (7v is enough to let the pump silently run ).
Also, 60 degrees for a short while (a few hours) isnt a problem. Constantly 60 degrees is a problem.
These pumps are proven in many many watercooling systems (along with the D5 which is a bit overkill in your situation). So i wouldnt worry.
http://www.youtube.com/watch?v=HN0LDjHZ4NQ
This video (not me, no relation, just random vid I googled) shows replacing the top of a MCP655 (D5) pump. Its literally a replacement for the top part of the pump.
In the case of the MCP350/355 it adds a bunch of performance (http://martin.skinneelabs.com/DDC32PumpTopTesting.html), due to what is considered a design flaw in the stock top.
The MCP655 doesn't benefit so much in performance from a replacement top, but it does seem to reduce the noise nicely (I am very happy with the top on my MCP655!). D5 top comparison is here: http://skinneelabs.com/d5-tops.html
I have no idea if either of these pumps will fit inside the reservator... but dimensions are available on the swiftech site, and I am sure the pumps can be fitted inside the case as well if need be.
EDIT: No need to apologise, these forums are for asking questions!
This video (not me, no relation, just random vid I googled) shows replacing the top of a MCP655 (D5) pump. Its literally a replacement for the top part of the pump.
In the case of the MCP350/355 it adds a bunch of performance (http://martin.skinneelabs.com/DDC32PumpTopTesting.html), due to what is considered a design flaw in the stock top.
The MCP655 doesn't benefit so much in performance from a replacement top, but it does seem to reduce the noise nicely (I am very happy with the top on my MCP655!). D5 top comparison is here: http://skinneelabs.com/d5-tops.html
I have no idea if either of these pumps will fit inside the reservator... but dimensions are available on the swiftech site, and I am sure the pumps can be fitted inside the case as well if need be.
EDIT: No need to apologise, these forums are for asking questions!
-
- Posts: 266
- Joined: Wed Mar 31, 2010 8:19 am
- Location: OV, The Netherlands
I would say, get the MCP350 or 355. A D5 is pretty much overkill because the tubing of the reserator is too small for the flow the D5 can generate.
MCP350 will probably need somekind of top because the inlet of the original pump is on the side. You'lll need a inlet on the top (judging from google images of the original pump).
MCP350 will probably need somekind of top because the inlet of the original pump is on the side. You'lll need a inlet on the top (judging from google images of the original pump).
Thanks for the advice. I had a suspicion the 655 might be overkill since both the 350 and 355 are rated at higher pressure and flow than the original one shipped with the Reserator, and that one managed to hold my rig at a constant 40C.
Also, very good advice about the inlet positions, tied well in with ascl's about performance gains from other tops!
Also, very good advice about the inlet positions, tied well in with ascl's about performance gains from other tops!
-
- Friend of SPCR
- Posts: 2887
- Joined: Mon Feb 28, 2005 4:21 pm
- Location: New York City zzzz
- Contact:
the eheim 300 that goes in the machine lasts often for more than 4-5 years.
People nag me on here for it, but using pure steam distilled water from a supermarket and like 3-4% water Wetter from redline keeps a pumps SMOOTH and well lubricated for a super long time.
I havent thought about replacing my pump and I have a reserator 1 v1 running 24/7 on a gaming system. 5770 and a e8400 currently.
People nag me on here for it, but using pure steam distilled water from a supermarket and like 3-4% water Wetter from redline keeps a pumps SMOOTH and well lubricated for a super long time.
I havent thought about replacing my pump and I have a reserator 1 v1 running 24/7 on a gaming system. 5770 and a e8400 currently.
-
- Friend of SPCR
- Posts: 2887
- Joined: Mon Feb 28, 2005 4:21 pm
- Location: New York City zzzz
- Contact:
I havent been on in a while....
It is not possible as far as I know to fix a pump. I believe the only reasons a pump normally stops working is on account of part wear and tear. Eheim 300 are cheap cheap. Water pumps utilize the surrounding water to act as lubrication, it is an open system in many ways.
It is not possible as far as I know to fix a pump. I believe the only reasons a pump normally stops working is on account of part wear and tear. Eheim 300 are cheap cheap. Water pumps utilize the surrounding water to act as lubrication, it is an open system in many ways.